prikaz prve stranice dokumenta Removal of impurities from mixed origin pyrolytic oil
No public access
master's thesis
Removal of impurities from mixed origin pyrolytic oil
Zagreb, Split: University of Zagreb, Faculty of Chemical Engineering and Technology, 2024. urn:nbn:hr:149:885642
Cestarić, Mirjana
University of Zagreb
Faculty of Chemical Engineering and Technology
University of Split
Faculty of Chemistry and Technology

Institutional repository: Repository of Faculty of Chemical Engineering and Technology University of Zagreb

Cite this document

Cestarić, M. (2024). Removal of impurities from mixed origin pyrolytic oil (Master's thesis). Zagreb: University of Zagreb, Faculty of Chemical Engineering and Technology; Split: University of Split, Faculty of Chemistry and Technology. Retrieved from https://urn.nsk.hr/urn:nbn:hr:149:885642

Cestarić, Mirjana. "Removal of impurities from mixed origin pyrolytic oil." Master's thesis, University of Zagreb, Faculty of Chemical Engineering and Technology; University of Split, Faculty of Chemistry and Technology, 2024. https://urn.nsk.hr/urn:nbn:hr:149:885642

Cestarić, Mirjana. "Removal of impurities from mixed origin pyrolytic oil." Master's thesis, University of Zagreb, Faculty of Chemical Engineering and Technology; University of Split, Faculty of Chemistry and Technology, 2024. https://urn.nsk.hr/urn:nbn:hr:149:885642

Cestarić, M. (2024). 'Removal of impurities from mixed origin pyrolytic oil', Master's thesis, University of Zagreb, Faculty of Chemical Engineering and Technology; University of Split, Faculty of Chemistry and Technology, accessed 29 March 2025, https://urn.nsk.hr/urn:nbn:hr:149:885642

Cestarić M. Removal of impurities from mixed origin pyrolytic oil [Master's thesis]. Zagreb: University of Zagreb, Faculty of Chemical Engineering and Technology; Split: University of Split, Faculty of Chemistry and Technology; 2024 [cited 2025 March 29] Available at: https://urn.nsk.hr/urn:nbn:hr:149:885642

M. Cestarić, "Removal of impurities from mixed origin pyrolytic oil", Master's thesis, University of Zagreb, Faculty of Chemical Engineering and Technology, Zagreb; University of Split, Faculty of Chemistry and Technology, Split, 2024. Available at: https://urn.nsk.hr/urn:nbn:hr:149:885642

Metadata
TitleRemoval of impurities from mixed origin pyrolytic oil
Title (croatian)Uklanjanje nečistoća iz pirolitičkog ulja miješanog podrijetla
AuthorMirjana Cestarić
MentorZvonimir Katančić (mentor)
MentorAleksandra Sander (komentor)
Committee memberZvonimir Katančić (predsjednik povjerenstva)
Committee memberAleksandra Sander (član povjerenstva)
Committee memberMaja Fabulić- Ruszkowski (član povjerenstva)
GranterUniversity of Zagreb
Faculty of Chemical Engineering and Technology
Zagreb
GranterUniversity of Split
Faculty of Chemistry and Technology
Split
Defense date and country2024-10-30, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Chemical Engineering
Abstract
Demographic growth and increasing industrialization have recently affected the increased demand for fuels, so oil and fossil fuel stocks are decreasing each day, and their alternatives are being sought. Pyrolytic oil, as a product of pyrolysis, has similar composition and properties to oil. By distillation it is separated into fractions, whereby the light fraction is similar in composition to gasoline, and the medium fraction to diesel. Due to the higher concentration of impurities in pyrolytic... More oil, it requires pretreatment, i.e. purification. Currently, the most promising method due to its simplicity, high efficiency and economic acceptability is extraction with Deep Eutectic Solvents (DES). Accordingly, the aim of this thesis is to reduce impurities to a minimum in pyrolytic oil fractions by extraction, and also by blending purified fractions with gasoline and diesel fuel to obtain a blend (alternative fuel) of adequate characteristics, within the limits of standards for the commercial market. The effectiveness of four different DESs prepared from choline chloride, ethylene glycol, glycerol and K2CO3 was tested. The influence of three solvent to oil mass ratios (0.1:1, 0.25:1, 0.5:1) was examined using two different temperatures (room temperature and 40°C). Concentrations of nitrogen, sulphur, chlorine and total acid number were monitored. Using the Proton nuclear magnetic resonance (NMR) method, quantitative changes in the groups of olefins, paraffins and aromatics were monitored. The Fourier Transform Infrared Spectroscopy (FTIR) method confirmed the insolubility of the selected DES in the pyrolytic oil fractions. Based on the obtained results, the best DES, mass ratio and temperature were selected, and after the final purification, the fractions were blended with gasoline and diesel fuel. Finally, even though the selected blend of 97 wt.% gasoline and diesel with 3 wt.% light and medium purified pyrolytic oil fractions met the standards, the chlorine was still present in the blend, which is unacceptable for the commercial use. Less
Abstract (croatian)
Demografski rast i sve veća industrijalizacija nedavno su utjecali na povećanje potražnja za gorivima, pa se zalihe nafte i fosilnih goriva svakim danom smanjuju, a traže se njihove alternative. Pirolitičko ulje, kao produkt pirolize, ima sličan sastav i svojstva kao ulje. Destilacijom se odvaja na frakcije pri čemu laka frakcija je po sastavu slična benzinu, a srednja frakcija dizelu. Zbog veće koncentracije nečistoća u pirolitičkom ulju, ono zahtijeva predtretman, tj. pročišćavanje.... More Trenutno, metoda koja najviše obećava zbog svoje jednostavnosti, visoke učinkovitosti i ekonomske prihvatljivosti je ekstrakcija dubokim eutektičkim otapalima (DES). Sukladno tome, cilj ovog rada je smanjiti nečistoće u pirolitičkom ulju na najmanju moguću mjeru frakcija ekstrakcijom, kao i miješanjem pročišćenih frakcija s benzinom i dizelom goriva za dobivanje mješavine (alternativnog goriva) odgovarajućih karakteristika, unutar granica standarde za komercijalno tržište. Ispitana je djelotovornost četiri različita pripremljena DES-a iz kolin klorida, etilen glikola, glicerola i K2CO3. Ispitan je utjecaj tri omjera mase otapala i ulja (0,1:1, 0,25:1, 0,5:1) na dvije različite temperature (sobna temperatura i 40°C). Praćene su koncentracije dušika, sumpora, klora i ukupni kiselinski broj. Kvantitativne promjene u skupinama olefina, parafina i aromata utvrđene su metodom nuklearne magnetske rezonancije (NMR). Metoda infracrvene spektroskopije Fourierove transformacije (FTIR) potvrdila je netopljivost odabranog DES u frakcijama pirolitičkog ulja. Na temelju dobivenih rezultata odabran je najbolji DES, omjer mase i temperature, a nakon konačnog pročišćavanja, frakcije su pomiješane s benzinom i dizel gorivom. Iako je odabrana mješavina 97 mas.% benzina i dizela s 3 mas.% laganog i srednje pročišćene frakcije pirolitičkog ulja zadovoljava standarde, klor je i dalje bio prisutan u mješavini, što je neprihvatljivo za komercijalnu upotrebu. Less
Keywords
Keywords (croatian)
Languageenglish
URN:NBNurn:nbn:hr:149:885642
Study programmeTitle: Chemical and environmental technology - graduate - university
Study programme type: university
Study level: graduate
Academic / professional title: sveučilišni/a magistar/magistra inženjer/inženjerka kemijskog inženjerstva (sveučilišni/a magistar/magistra inženjer/inženjerka kemijskog inženjerstva)
Type of resourceText
File originBorn digital
Access conditionsClosed access
Terms of useLicence In copyright icon
Created on2024-11-19 14:48:37
accessibility

closeAccessibilityrefresh

If you wish to permanently save changes, click on Save, if not - your settings will be reset when you restart the browser.