prikaz prve stranice dokumenta Izvedba pH senzora ink-jet printanjem
  Download
PDF 1.99 MB
master's thesis
Izvedba pH senzora ink-jet printanjem
Zagreb: University of Zagreb, Faculty of Chemical Engineering and Technology, 2017. urn:nbn:hr:149:561102
Matanović, Rafaela
University of Zagreb
Faculty of Chemical Engineering and Technology

Institutional repository: Repository of Faculty of Chemical Engineering and Technology University of Zagreb

Cite this document

Matanović, R. (2017). Izvedba pH senzora ink-jet printanjem (Master's thesis). Zagreb: University of Zagreb, Faculty of Chemical Engineering and Technology. Retrieved from https://urn.nsk.hr/urn:nbn:hr:149:561102

Matanović, Rafaela. "Izvedba pH senzora ink-jet printanjem." Master's thesis, University of Zagreb, Faculty of Chemical Engineering and Technology, 2017. https://urn.nsk.hr/urn:nbn:hr:149:561102

Matanović, Rafaela. "Izvedba pH senzora ink-jet printanjem." Master's thesis, University of Zagreb, Faculty of Chemical Engineering and Technology, 2017. https://urn.nsk.hr/urn:nbn:hr:149:561102

Matanović, R. (2017). 'Izvedba pH senzora ink-jet printanjem', Master's thesis, University of Zagreb, Faculty of Chemical Engineering and Technology, accessed 18 November 2024, https://urn.nsk.hr/urn:nbn:hr:149:561102

Matanović R. Izvedba pH senzora ink-jet printanjem [Master's thesis]. Zagreb: University of Zagreb, Faculty of Chemical Engineering and Technology; 2017 [cited 2024 November 18] Available at: https://urn.nsk.hr/urn:nbn:hr:149:561102

R. Matanović, "Izvedba pH senzora ink-jet printanjem", Master's thesis, University of Zagreb, Faculty of Chemical Engineering and Technology, Zagreb, 2017. Available at: https://urn.nsk.hr/urn:nbn:hr:149:561102

Metadata
TitleIzvedba pH senzora ink-jet printanjem
Title (english)pH sensor preparation by ink-jet printing
AuthorRafaela Matanović
MentorStjepan Milardović (mentor)
Committee memberStjepan Milardović (predsjednik povjerenstva)
Committee memberMarijana Kraljić Roković (član povjerenstva)
Committee memberLidija Furač (član povjerenstva)
GranterUniversity of Zagreb
Faculty of Chemical Engineering and Technology
Zagreb
Defense date and country2017-07-11, Croatia
Scientific / art field,
discipline and subdiscipline		NATURAL SCIENCES
Chemistry
Inorganic Chemistry
Abstract
Cilj ovog rada bio je dizajnirati pH senzor na vodljivom supstratu. Elektroda na vodljivom supstratu izvedena je srebrnim nanočesticama tehnologijom ink-jet printanja. Tako pripravljena elektroda modificirana je vodljivim polimerom na bazi polianilina (PANI), kako bi se ostvario pH osjetljiv sloj. Provedeno je i mjerenje pH osjetljivosti klasičnih disk elektroda, zlatne elektrode (Au) i elektrode od staklastog ugljika (GC). Elektrode su oslojene vodljivim polimerom (PANI) te je testirana njihova pH osjetljivost primjenom Britton-Robinsonovih pufera. Testiran je i odziv komercijalne staklene elektrode za mjerenje pH kako bi dobivene rezultate mogli usporediti s modificiranim disk elektrodama. Modifikacija elektroda dobivenih ink-jet printanjem prije elektrokemijskog oslojavanja polianilinom izvedena je komercijalnom tintom na bazi ugljika ili slojem epoksi-grafita. Elektrokemijsko formiranje polianilina ostvareno je iz otopine anilina pripravljene u klorovodičnoj kiselini, primjenom cikličke voltametrije. Tako su dobivene dvije modifikacije koje su podvrgnute potenciometrijskom mjerenju. Testiranje pripravljenih pH senzora provedeno je u neprotočnoj i protočnoj mjernoj ćeliji. Protočna mjerenja izvedena su metodom injektiranja u protok te metodom kontinuiranog protoka.
Abstract (english)
The aim of this work was to design a pH sensor on the plastic flexible substrate. Silver nanoparticles based ink was used for made conductive electrode by ink-jet printing technology. The prepared electrode was modified by a conductive polymer based on polyaniline (PANI), to achieve a pH sensitive layer. Measurement of pH sensitivity was also performed for classical disc electrodes, gold electrodes (Au) and glassy carbon (GC) electrodes. The electrodes are coated by a conductive polymer (PANI) and their pH sensitivity was tested using Britton-Robinson's buffers. Response of commercial glass electrode for measuring pH was also tested in order to compare the results with the modified disk electrodes. Modification of electrodes obtained by ink-jet printing prior to electrochemical coating by polyaniline was performed by commercial carbon-based ink or epoxy-graphite layer. Electrochemical formation of polyaniline was made from aniline solution prepared in hydrochloric acid using cyclic voltammetry. Such two modifications were subjected to potentiometric measurement. Testing of the prepared pH sensors was performed in a standard no flow and flow measuring cell. Flow measurements were performed by the flow injection method and the continuous flow method.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:149:561102
Study programmeTitle: Environmental Engineering - Graduate study
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka ekoinženjerstva (magistar/magistra inženjer/inženjerka ekoinženjerstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2019-11-07 14:07:51