prikaz prve stranice dokumenta Priprava smjesa celuloznog acetata i metakrilata
  Download
PDF 2.21 MB
master's thesis
Priprava smjesa celuloznog acetata i metakrilata
Zagreb: University of Zagreb, Faculty of Chemical Engineering and Technology, 2018. urn:nbn:hr:149:037786
Avgustinović, Renata
University of Zagreb
Faculty of Chemical Engineering and Technology

Institutional repository: Repository of Faculty of Chemical Engineering and Technology University of Zagreb

Cite this document

Avgustinović, R. (2018). Priprava smjesa celuloznog acetata i metakrilata (Master's thesis). Zagreb: University of Zagreb, Faculty of Chemical Engineering and Technology. Retrieved from https://urn.nsk.hr/urn:nbn:hr:149:037786

Avgustinović, Renata. "Priprava smjesa celuloznog acetata i metakrilata." Master's thesis, University of Zagreb, Faculty of Chemical Engineering and Technology, 2018. https://urn.nsk.hr/urn:nbn:hr:149:037786

Avgustinović, Renata. "Priprava smjesa celuloznog acetata i metakrilata." Master's thesis, University of Zagreb, Faculty of Chemical Engineering and Technology, 2018. https://urn.nsk.hr/urn:nbn:hr:149:037786

Avgustinović, R. (2018). 'Priprava smjesa celuloznog acetata i metakrilata', Master's thesis, University of Zagreb, Faculty of Chemical Engineering and Technology, accessed 22 November 2024, https://urn.nsk.hr/urn:nbn:hr:149:037786

Avgustinović R. Priprava smjesa celuloznog acetata i metakrilata [Master's thesis]. Zagreb: University of Zagreb, Faculty of Chemical Engineering and Technology; 2018 [cited 2024 November 22] Available at: https://urn.nsk.hr/urn:nbn:hr:149:037786

R. Avgustinović, "Priprava smjesa celuloznog acetata i metakrilata", Master's thesis, University of Zagreb, Faculty of Chemical Engineering and Technology, Zagreb, 2018. Available at: https://urn.nsk.hr/urn:nbn:hr:149:037786

Metadata
TitlePriprava smjesa celuloznog acetata i metakrilata
Title (english)Preparation of cellulose acetate and methacrylate blends
AuthorRenata Avgustinović
MentorElvira Vidović (mentor)
Committee memberElvira Vidović (predsjednik povjerenstva)
Committee memberMirela Leskovac (član povjerenstva)
Committee memberMarijana Kraljić Roković (član povjerenstva)
GranterUniversity of Zagreb
Faculty of Chemical Engineering and Technology
Zagreb
Defense date and country2018-09-27, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Chemical Engineering
Chemical Engineering in Material Development
Abstract
U ovom radu ispitivane su mješavine poli(metil-metakrilata) i celuloznog acetata, PMMA/CA. Pripremljeni su tanki filmovi čistih komponenata PMMA i CA te polimerne mješavine PMMA/CA sa različitim masenim udjelima CA: 5 % CA (CA5), 10 % CA (CA10) i 20 % (CA20) kako bi se ispitao utjecaj dodatka određene količine CA na svojstva dobivenih uzoraka. Korištene tehnike karakterizacije su termogravimetrijska analiza, diferencijalna pretražna kalorimetrija, infracrvena spektroskopija, pretražna elektronska mikroskopija; određen je kontaktni kut te barijerna i mehanička svojstva uzoraka. Rezultati su pokazali bolja toplinska i mehanička svojstva čistog CA u odnosu na PMMA, međutim, dodatak određene količine CA u polimerne mješavine nije pridonio značajnijem poboljšanju toplinskih i mehaničkih svojstava mješavina. Priređene folije pokazuju porast hidrofilnosti s porastom udjela CA što je vjerojatno posljedica razlika u hrapavosti površine, s obzirom da istovremeno folije mješavina ne pokazuju povećanje propusnost spram vodene pare.
Abstract (english)
In this study, blends of poly(methyl methacrylate) and cellulose acetate, PMMA/CA were tested. Thin films of pure PMMA, CA and PMMA/CA polymeric blends with different mass ratio of CA: 5 % CA (CA5), 10 % CA (CA10) and 20 % (CA20) were prepared to test the effect of adding a certain amount of CA on properties obtained samples. The used characterization techniques are thermogravimetric analysis, differential scanning calorimetry, infrared spectroscopy, scanning electron microscopy; the contact angle and the barrier and mechanical properties. The results showed better thermal and mechanical properties of pure CA compared to PMMA, however, the addition of certain amount of CA into polymer blends had no a significant effect on improving the thermal and mechanical properties of the blends. The hydrophilicity of blends increased with increasing ratio of CA, which most likely resulted from the difference regarding the surface smoothness, having in mind that foils prepared from blends did not show better barrier properties against water vapor, at the same time.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:149:037786
Study programmeTitle: Materials Science and Engineering - Graduate study
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka kemijskog inženjerstva (magistar/magistra inženjer/inženjerka kemijskog inženjerstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2020-10-29 12:29:06