prikaz prve stranice dokumenta Priprava nano-ZnO prevlaka
Access restricted to students and staff of home institution
master's thesis
Priprava nano-ZnO prevlaka
Zagreb: University of Zagreb, Faculty of Chemical Engineering and Technology, 2019. urn:nbn:hr:149:477335
Crnković, Filip
University of Zagreb
Faculty of Chemical Engineering and Technology

Institutional repository: Repository of Faculty of Chemical Engineering and Technology University of Zagreb

Cite this document

Crnković, F. (2019). Priprava nano-ZnO prevlaka (Master's thesis). Zagreb: University of Zagreb, Faculty of Chemical Engineering and Technology. Retrieved from https://urn.nsk.hr/urn:nbn:hr:149:477335

Crnković, Filip. "Priprava nano-ZnO prevlaka." Master's thesis, University of Zagreb, Faculty of Chemical Engineering and Technology, 2019. https://urn.nsk.hr/urn:nbn:hr:149:477335

Crnković, Filip. "Priprava nano-ZnO prevlaka." Master's thesis, University of Zagreb, Faculty of Chemical Engineering and Technology, 2019. https://urn.nsk.hr/urn:nbn:hr:149:477335

Crnković, F. (2019). 'Priprava nano-ZnO prevlaka', Master's thesis, University of Zagreb, Faculty of Chemical Engineering and Technology, accessed 10 November 2024, https://urn.nsk.hr/urn:nbn:hr:149:477335

Crnković F. Priprava nano-ZnO prevlaka [Master's thesis]. Zagreb: University of Zagreb, Faculty of Chemical Engineering and Technology; 2019 [cited 2024 November 10] Available at: https://urn.nsk.hr/urn:nbn:hr:149:477335

F. Crnković, "Priprava nano-ZnO prevlaka", Master's thesis, University of Zagreb, Faculty of Chemical Engineering and Technology, Zagreb, 2019. Available at: https://urn.nsk.hr/urn:nbn:hr:149:477335

Metadata
TitlePriprava nano-ZnO prevlaka
Title (english)Preparation of nano-ZnO coatings
AuthorFilip Crnković
MentorMirela Leskovac (mentor)
Committee memberMirela Leskovac (predsjednik povjerenstva)
Committee memberSanja Lučić Blagojević (član povjerenstva)
Committee memberDomagoj Vrsaljko (član povjerenstva)
GranterUniversity of Zagreb
Faculty of Chemical Engineering and Technology
Zagreb
Defense date and country2019-09-24, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Chemical Engineering
Abstract
Pripravom kompozitnih mješavina polimernih materijala s punilima moguće je poboljšati njihova mehanička, toplinska, zaštitna, te ostala uporabna svojstva. Cilj ovog diplomskog rada je istražiti pripravu nanokompozitnog materijala na osnovi mješavina polilaktida (PLA) i polikaprolaktona (PCL) sa cinkovim oksidom (ZnO) kao nanopunilom, te karakterizirati mehanička, toplinska, i zaštitna svojstva prevlaka napravljenih od navedenih nanokompozita. PLA/PCL/ZnO kompoziti su pripravljeni s različitim masenim udjelima komponenata u otopini kloroforma. Provedena su vlačna ispitivanja mehaničkih svojstava, te toplinska svojstva primjenom termogravimetrijske anlize (TGA) i diferencijalne pretražne kalorimetrije (DSC) na filmovima debljine 4 μm. Prevlake su nanesene na metalne pločice od aluminija, bakra, i ugljičnog čelika, te su njihova zaštitna svojstva ispitana primjenom elektrokemijske impenancijske spektroskopije(EIS). Utvrđena su značajna poboljšanja mehaničkih svojstava kompozitnog materijala u odnosu na čiste polimere i njihove mješavine, te su utvrđena dobra zaštitnih svojstava i stabilnosti prevlaka.
Abstract (english)
The preparation of polymer mixtures with ZnO nanofiller it is possible to improve their mechanical, thermal, protective, as well as other usable properties. The aim of this master’s thesis is to investigate the preparation of nanocomposite material with a polylactide (PLA) and polycaprolactone (PCL) polymers with zinc oxide (ZnO) as the nanofiller, and characterize the mechanical, thermal, and protective properties of its coatings. PLA/PCL/ZnO nanocomposites are prepared with different mass ratio of components by mixing in chloroform as the solvent. Tensile, termogravimetric (TGA) and differential scanning calorimetry (DSC) testing were performed on films 4 μm thick. The coatings are applied on metal plates from aluminium, copper and carbon steel, after which their protective properties are investigated through electrochemical impedance spectroscopy (EIS) It is determined that there is a noticeable improvement in the mechanical properties of the composites in comparison to the pure polymers and their mixtures, and there has been no degradation of protective properties and thermal stability.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:149:477335
Study programmeTitle: Chemical Engineering - Graduate study
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka kemijskog inženjerstva (magistar/magistra inženjer/inženjerka kemijskog inženjerstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2022-02-16 14:06:52