prikaz prve stranice dokumenta Konstrukcija nosača baterijskog paketa u sklopu razvoja prototipnog baterijski pogonjenog elektromotornog vlaka
Embargo period 2026-02-28
undergraduate thesis
Konstrukcija nosača baterijskog paketa u sklopu razvoja prototipnog baterijski pogonjenog elektromotornog vlaka
Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2024. urn:nbn:hr:235:594159
Vidović, Jan
University of Zagreb
Faculty of Mechanical Engineering and Naval Architecture

Institutional repository: Repository of Faculty of Mechanical Engineering and Naval Architecture University of Zagreb

Cite this document

Vidović, J. (2024). Konstrukcija nosača baterijskog paketa u sklopu razvoja prototipnog baterijski pogonjenog elektromotornog vlaka (Undergraduate thesis). Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:235:594159

Vidović, Jan. "Konstrukcija nosača baterijskog paketa u sklopu razvoja prototipnog baterijski pogonjenog elektromotornog vlaka." Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2024. https://urn.nsk.hr/urn:nbn:hr:235:594159

Vidović, Jan. "Konstrukcija nosača baterijskog paketa u sklopu razvoja prototipnog baterijski pogonjenog elektromotornog vlaka." Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2024. https://urn.nsk.hr/urn:nbn:hr:235:594159

Vidović, J. (2024). 'Konstrukcija nosača baterijskog paketa u sklopu razvoja prototipnog baterijski pogonjenog elektromotornog vlaka', Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, accessed 17 November 2024, https://urn.nsk.hr/urn:nbn:hr:235:594159

Vidović J. Konstrukcija nosača baterijskog paketa u sklopu razvoja prototipnog baterijski pogonjenog elektromotornog vlaka [Undergraduate thesis]. Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture; 2024 [cited 2024 November 17] Available at: https://urn.nsk.hr/urn:nbn:hr:235:594159

J. Vidović, "Konstrukcija nosača baterijskog paketa u sklopu razvoja prototipnog baterijski pogonjenog elektromotornog vlaka", Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Zagreb, 2024. Available at: https://urn.nsk.hr/urn:nbn:hr:235:594159

Metadata
TitleKonstrukcija nosača baterijskog paketa u sklopu razvoja prototipnog baterijski pogonjenog elektromotornog vlaka
Title (english)Design of battery pack mounting bracket as part of prototype battery-driven electric train development
AuthorJan Vidović
MentorDragan Žeželj (mentor)
GranterUniversity of Zagreb
Faculty of Mechanical Engineering and Naval Architecture
Zagreb
Defense date and country2024-02-29, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
General Mechanical Engineering (Construction)
Abstract
Tema ovog završnog rada je konstruiranje i simuliranje nosača krovnih baterija vlaka putem programskog paketa CATIA na način da zadovolje normu HRN EN 12633. Nosače je potrebno izraditi iz legure AlZn10Si8Mg postupkom gravitacijskog lijevanja u pješčani kalup. Prije konstruiranja objašnjena je navedena norma, postupak lijevanja i razlog korištenja navojnih umetaka za vijčane spojeve. Zatim rad prikazuje iterativni postupak dolaska do konačnog proizvoda simuliranjem inačica nosača jednu za drugom unaprjeđujući ih sve do zadnje. Nakon dobivenog oblika konačnog nosača proizveden je 3D printani model koji služi za proizvodnju pješčanih kalupa. Korištenjem programskog paketa Altair Inspire Cast simulirano je lijevanje aluminijske legure u kalup i naznačeni potencijalni problemi prilikom lijevanja te je prikazan postupak lijevanja uživo. Na kraju rada nalaze se rezultati ispitivanja provedenih tokom proizvodnje nosača kako bi se usporedio nosač dobiven u programskom paketu sa stvarnim rezultatima ispitivanja.
Abstract (english)
The subject of this final paper is the construction and simulation of train roof battery supports using the CATIA software package in such a way that the HRN 12633 standard is met. The supports must be made from the AlZn10SiMg alloy using gravity die casting into a sand mold. Before constructing, the stated norm, casting process and the reason for using threaded inserts for screw connections were explained. Then the paper shows the iterative process of working towards the final product by simulating the mounting bracket versions one after the other and improving them until the last one. After obtaining the shape of the final mounting bracket, a 3D printed model was produced, which is used for the production of sand molds. Using the software package Altair Inspire Cast, the casting of the Aluminium alloy into a mold was simulated and potential problems during the casting were indicated after which a live casting process was shown. At the end of the paper, the results of tests carried out during the production of the mounting brackets are shown so that real results could be compared to the ones obtained in the software packages.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:235:594159
Study programmeTitle: Mechanical Engineering; specializations in: Design, Process and Energy Engineering, Production Engineering, Engineering Modelling and Computer Simulation, Marine Engineering, Industrial Engineering and Management, Materials Engineering
Course: Design
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsEmbargoed access
Embargo expiration date: 2026-02-28
Terms of useLicence Attribution 4.0 International (CC BY 4.0) icon
Created on2024-02-25 15:36:52