prikaz prve stranice dokumenta Investigation and Statistical Evaluation of Reinforced Aluminum Foams
  Download
PDF 1.3 MB
Scientific paper - Original scientific paper
Investigation and Statistical Evaluation of Reinforced Aluminum Foams
Processes, 9 (2021), 2; 1-16. https://doi.org/10.3390/pr9020315
Bunjan, Ivana; Grilec, Krešimir; Ćorić, Danko

Institutional repository: Repository of Faculty of Mechanical Engineering and Naval Architecture University of Zagreb

Cite this document

Bunjan, I., Grilec, K. & Ćorić, D. (2021). Investigation and Statistical Evaluation of Reinforced Aluminum Foams. Processes, 9. (2), 1-16. doi: 10.3390/pr9020315

Bunjan, Ivana, et al. "Investigation and Statistical Evaluation of Reinforced Aluminum Foams." Processes, vol. 9, no. 2, 2021, pp. 1-16. https://doi.org/10.3390/pr9020315

Bunjan, Ivana, Krešimir Grilec and Danko Ćorić. "Investigation and Statistical Evaluation of Reinforced Aluminum Foams." Processes 9, no. 2 (2021): 1-16. https://doi.org/10.3390/pr9020315

Bunjan, I., Grilec, K. and Ćorić, D. (2021) 'Investigation and Statistical Evaluation of Reinforced Aluminum Foams', Processes, 9(2), pp. 1-16. doi: 10.3390/pr9020315

Bunjan I, Grilec K, Ćorić D. Investigation and Statistical Evaluation of Reinforced Aluminum Foams. Processes [Internet]. 2021 February 08 [cited 2024 December 20];9(2):1-16. doi: 10.3390/pr9020315

I. Bunjan, K. Grilec and D. Ćorić, "Investigation and Statistical Evaluation of Reinforced Aluminum Foams", Processes, vol. 9, no. 2, pp. 1-16, February 2021. [Online]. Available at: https://urn.nsk.hr/urn:nbn:hr:235:122170. [Accessed: 20 December 2024]

Metadata
Title (english)Investigation and Statistical Evaluation of Reinforced Aluminum Foams
AuthorIvana Bunjan
AuthorKrešimir Grilec
AuthorDanko Ćorić
Author's institutionUniversity of Zagreb
Faculty of Mechanical Engineering and Naval Architecture
(Department of Materials)
(Chair of Materials and Tribology)
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Production Mechanical Engineering
Abstract (english)
In this study, aluminum foams reinforced with different steel elements were produced by the AluLight process. The master alloy AlMgSi0.6 was used as the matrix material, titanium hydride (TiH2) powder was used as a foaming agent, and steel wire, cylindrical steel mesh and flat steel mesh were used as reinforcing elements. Reinforcements were placed inside the mold, along with the precursors, and samples were manufactured by gas releasing particles in a semi-solid state. To examine the effect of the reinforcements on specific energy absorption, quasi-static uniaxial compression tests were carried out, with a constant separation rate of 1 mm/s. From the tested results, the energy absorption per unit volume and specific energy absorption efficiency were calculated and then also statistically evaluated. The results showed that examined shapes of reinforcements affect differently specific energy absorption and its efficiency, compared to non-reinforced aluminum foams. The best result obtained was with cylindrically shaped steel mesh.
Keywords (english)
Languageenglish
Publication typeScientific paper - Original scientific paper
Publication statusPublished
Peer reviewPeer review - international
Publication versionAccepted version
Journal titleProcesses
Numberingvol. 9, no. 2, pp. 1-16, 315
e-ISSN2227-9717
DOIhttps://doi.org/10.3390/pr9020315
URN:NBNurn:nbn:hr:235:122170
Publication2021-02-08
Document URLhttps://www.mdpi.com/2227-9717/9/2/315
Type of resourceText
Access conditionsOpen access
Terms of useLicence Attribution 4.0 International (CC BY 4.0) icon
Created on2024-05-22 11:46:21