prikaz prve stranice dokumenta Analysis of the Accuracy of Mass Difference-Based Measurement of Dry Clutch Friction Material Wear
  Download
PDF 3.17 MB
Scientific paper - Original scientific paper
Analysis of the Accuracy of Mass Difference-Based Measurement of Dry Clutch Friction Material Wear
Materials, 14 (2021), 18; 5356-5373. https://doi.org/10.3390/ma14185356
Hoić, Matija; Miklik, Alen; Kostelac, Milan; Deur, Joško; Tissot, Andreas

Institutional repository: Repository of Faculty of Mechanical Engineering and Naval Architecture University of Zagreb

Cite this document

Hoić, M., Miklik, A., Kostelac, M., Deur, J. & Tissot, A. (2021). Analysis of the Accuracy of Mass Difference-Based Measurement of Dry Clutch Friction Material Wear. Materials, 14. (18), 5356-5373. doi: 10.3390/ma14185356

Hoić, Matija, et al. "Analysis of the Accuracy of Mass Difference-Based Measurement of Dry Clutch Friction Material Wear." Materials, vol. 14, no. 18, 2021, pp. 5356-5373. https://doi.org/10.3390/ma14185356

Hoić, Matija, Alen Miklik, Milan Kostelac, Joško Deur and Andreas Tissot. "Analysis of the Accuracy of Mass Difference-Based Measurement of Dry Clutch Friction Material Wear." Materials 14, no. 18 (2021): 5356-5373. https://doi.org/10.3390/ma14185356

Hoić, M., et al. (2021) 'Analysis of the Accuracy of Mass Difference-Based Measurement of Dry Clutch Friction Material Wear', Materials, 14(18), pp. 5356-5373. doi: 10.3390/ma14185356

Hoić M, Miklik A, Kostelac M, Deur J, Tissot A. Analysis of the Accuracy of Mass Difference-Based Measurement of Dry Clutch Friction Material Wear. Materials [Internet]. 2021 September 16 [cited 2024 December 18];14(18):5356-5373. doi: 10.3390/ma14185356

M. Hoić, A. Miklik, M. Kostelac, J. Deur and A. Tissot, "Analysis of the Accuracy of Mass Difference-Based Measurement of Dry Clutch Friction Material Wear", Materials, vol. 14, no. 18, pp. 5356-5373, September 2021. [Online]. Available at: https://urn.nsk.hr/urn:nbn:hr:235:960487. [Accessed: 18 December 2024]

Metadata
Title (english)Analysis of the Accuracy of Mass Difference-Based Measurement of Dry Clutch Friction Material Wear
AuthorMatija Hoić
AuthorAlen Miklik
AuthorMilan Kostelac
AuthorJoško Deur
AuthorAndreas Tissot
Author's institutionUniversity of Zagreb
Faculty of Mechanical Engineering and Naval Architecture
(Department of Robotics and Production System Automation)
(Chair of Engineering Automation)
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract (english)
The paper demonstrates that the dry clutch friction plate wear rate, measured based on the plate mass difference method, exhibits a transient behavior after each change of friction interface temperature level. The effect is hypothesized to be caused by a temperature-dependent change in the moisture content/mass level in the friction material. To test this hypothesis, a series of synchronized characterization experiments have been conducted by using two friction plates, one for wear tests and the other for drying in an oven under the same temperature conditions. Based on the analysis of test results, a moisture content compensation procedure, which reduces the transient wear rate from being 100% to being 50% higher compared to stabilized wear rate, is proposed and verified. The gained insights are used to set recommendations on the organization of routine wear characterization experiments aimed at avoiding the effect of moisture content influence on the accuracy of wear measurement. The main recommendations are to minimize the number of temperature target level changes through proper design of the experiment, insert a run-in test after every long test pause, and execute a pre-heat, blind wear test at the beginning of each test day.
Keywords (english)
Languageenglish
Publication typeScientific paper - Original scientific paper
Publication statusPublished
Peer reviewPeer review - international
Publication versionPublished version
Journal titleMaterials
Numberingvol. 14, no. 18, pp. 5356-5373
p-ISSN1996-1944
DOIhttps://doi.org/10.3390/ma14185356
URN:NBNurn:nbn:hr:235:960487
Publication2021-09-16
Document URLhttps://www.mdpi.com/1996-1944/14/18/5356
Type of resourceText
Access conditionsOpen access
Terms of useLicence Attribution 4.0 International (CC BY 4.0) icon
Created on2024-07-05 11:28:20