prikaz prve stranice dokumenta Utjecaj veličine abrazivnog zrna na abrazijsku otpornost subfosilnog drva jasena u tri karakteristična presjeka
  Download
PDF 3.44 MB
master's thesis
Utjecaj veličine abrazivnog zrna na abrazijsku otpornost subfosilnog drva jasena u tri karakteristična presjeka
Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2024. urn:nbn:hr:235:075144
Jukić, Josip
University of Zagreb
Faculty of Mechanical Engineering and Naval Architecture

Institutional repository: Repository of Faculty of Mechanical Engineering and Naval Architecture University of Zagreb

Cite this document

Jukić, J. (2024). Utjecaj veličine abrazivnog zrna na abrazijsku otpornost subfosilnog drva jasena u tri karakteristična presjeka (Master's thesis). Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:235:075144

Jukić, Josip. "Utjecaj veličine abrazivnog zrna na abrazijsku otpornost subfosilnog drva jasena u tri karakteristična presjeka." Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2024. https://urn.nsk.hr/urn:nbn:hr:235:075144

Jukić, Josip. "Utjecaj veličine abrazivnog zrna na abrazijsku otpornost subfosilnog drva jasena u tri karakteristična presjeka." Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2024. https://urn.nsk.hr/urn:nbn:hr:235:075144

Jukić, J. (2024). 'Utjecaj veličine abrazivnog zrna na abrazijsku otpornost subfosilnog drva jasena u tri karakteristična presjeka', Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, accessed 20 December 2024, https://urn.nsk.hr/urn:nbn:hr:235:075144

Jukić J. Utjecaj veličine abrazivnog zrna na abrazijsku otpornost subfosilnog drva jasena u tri karakteristična presjeka [Master's thesis]. Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture; 2024 [cited 2024 December 20] Available at: https://urn.nsk.hr/urn:nbn:hr:235:075144

J. Jukić, "Utjecaj veličine abrazivnog zrna na abrazijsku otpornost subfosilnog drva jasena u tri karakteristična presjeka", Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Zagreb, 2024. Available at: https://urn.nsk.hr/urn:nbn:hr:235:075144

Metadata
TitleUtjecaj veličine abrazivnog zrna na abrazijsku otpornost subfosilnog drva jasena u tri karakteristična presjeka
Title (english)Effect of abrasive grain size on the abrasion resistance of subfossil ash wood in three characteristic sections
AuthorJosip Jukić
MentorVera Rede (mentor)
GranterUniversity of Zagreb
Faculty of Mechanical Engineering and Naval Architecture
Zagreb
Defense date and country2024-07-15, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Production Mechanical Engineering
Abstract
Osnovni cilj ovog rada je utvrditi kako usmjerenost strukture utječe na abrazijsku otpornost i tvrdoću drva subfosilnog jasena njegova tri karakteristična presjeka. Tvrdoća je izmjerena Brinellovom metodom, a otpornost na abrazijsko trošenje ispitana je na uređaju Taber abraser. Udio vlage u uzorcima pri ispitivanju iznosio je 6,81 %, a gustoća 0,674 g/cm3. Najviša tvrdoća izmjerena je u poprečnom presjeku i iznosila je 8,72 HB. Veličina abrazivnih čestica ima veliki utjecaj na intenzitet abrazijskog trošenja subfosilnog jasena. S povećanjem abrazivnih čestica raste i intenzitet trošenja. U odnosu na druge autohtone drvne vrste subfosilni jasen ima viši intenzitet abrazijskog trošenja.
Abstract (english)
The aim of this work is to determine how the orientation of the structure affects the abrasion resistance and hardness of subfossil ash wood in its three characteristic sections. The hardness was measured by the Brinell method, and the resistance to abrasive wear was tested on the Taber abraser. The proportion of moisture in the samples during testing was 6.81 %, and the density was 0.674 g/cm3. The highest hardness was measured in the cross-section and was 8.72 HB. The size of abrasive particles has a great influence on the intensity of abrasive wear of subfossil ash. With the increase in abrasive particles, the intensity of wear also increases. Compared to other autochthonous wood species, subfossil ash has a higher intensity of abrasion wear.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:235:075144
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2024-07-11 15:48:46