prikaz prve stranice dokumenta Utjecaj geometrije ticala na točnost rezultata mjerenja trokoordinatnog mjernog uređaja
  Download
PDF 1.48 MB
master's thesis
Utjecaj geometrije ticala na točnost rezultata mjerenja trokoordinatnog mjernog uređaja
Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2024. urn:nbn:hr:235:558263
Balić, Luka
University of Zagreb
Faculty of Mechanical Engineering and Naval Architecture

Institutional repository: Repository of Faculty of Mechanical Engineering and Naval Architecture University of Zagreb

Cite this document

Balić, L. (2024). Utjecaj geometrije ticala na točnost rezultata mjerenja trokoordinatnog mjernog uređaja (Master's thesis). Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:235:558263

Balić, Luka. "Utjecaj geometrije ticala na točnost rezultata mjerenja trokoordinatnog mjernog uređaja." Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2024. https://urn.nsk.hr/urn:nbn:hr:235:558263

Balić, Luka. "Utjecaj geometrije ticala na točnost rezultata mjerenja trokoordinatnog mjernog uređaja." Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2024. https://urn.nsk.hr/urn:nbn:hr:235:558263

Balić, L. (2024). 'Utjecaj geometrije ticala na točnost rezultata mjerenja trokoordinatnog mjernog uređaja', Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, accessed 26 December 2024, https://urn.nsk.hr/urn:nbn:hr:235:558263

Balić L. Utjecaj geometrije ticala na točnost rezultata mjerenja trokoordinatnog mjernog uređaja [Master's thesis]. Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture; 2024 [cited 2024 December 26] Available at: https://urn.nsk.hr/urn:nbn:hr:235:558263

L. Balić, "Utjecaj geometrije ticala na točnost rezultata mjerenja trokoordinatnog mjernog uređaja", Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Zagreb, 2024. Available at: https://urn.nsk.hr/urn:nbn:hr:235:558263

Metadata
TitleUtjecaj geometrije ticala na točnost rezultata mjerenja trokoordinatnog mjernog uređaja
Title (english)Influence of stylus geometry on accuracy of results on coordinate measuring machine
AuthorLuka Balić
MentorMarko Katić (mentor)
GranterUniversity of Zagreb
Faculty of Mechanical Engineering and Naval Architecture
Zagreb
Defense date and country2024-07-15, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Production Mechanical Engineering
Abstract
Trokoordinatni mjerni strojevi - CMM (eng. coordinate-measuring machine) strojevi koriste se u različitim industrijama poput automobilske, zrakoplovne, medicinske, strojogradnje i mnogih drugih. Njihova primarna svrha je pružiti precizne i točne mjere koje se koriste za kontrolu kvalitete i analizu proizvoda. Ukoliko dođe do pogrešaka u mjerenju, sama kontrola proizvoda nije primjenjiva te nije moguće napraviti kvalitetnu analizu proizvoda. Kako se mjerenja provode pomicanjem sonde duž predmetovih površina ili točkastim dodirivanjem određenih točaka, ukoliko dođe to trošenja vrha sonde ili mjerne površine doći će i do pogrešaka u samim mjerama. U ovom radu su opisani principi rada trokoordinatnih mjernih uređaja s dodirnim sustavom za akviziciju mjernih točaka, predložen je mjerni postav kojim se može ispitati utjecaj odabranih ticala na točnost rezultata mjerenja te su prikazani prikupljeni podaci.
Abstract (english)
Coordinate-measuring machine (CMM) machines are used in various industries such as automotive, aerospace, medical, mechanical engineering, and many others. Their primary purpose is to provide precise and accurate measurements used for quality control and product analysis. If errors occur in the measurements, product control is not applicable, and it is not possible to perform a quality product analysis. Measurements are carried out by moving the probe along the surfaces of the objects or by point contact with specific points. If there is wear on the probe tip or measuring surface, errors in measurements will occur. This paper describes the principles of operation of three-coordinate measuring devices with a touch system for acquiring measurement points. A measurement setup is proposed to investigate the influence of selected styli on the accuracy of measurement results, and the collected data is presented.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:235:558263
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2024-07-14 19:43:10