prikaz prve stranice dokumenta Razvoj zatezača remena za bicikl sa stražnjom suspenzijom
Embargo period 2026-09-23
undergraduate thesis
Razvoj zatezača remena za bicikl sa stražnjom suspenzijom
Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2024. urn:nbn:hr:235:721908
Barić, Vedran
University of Zagreb
Faculty of Mechanical Engineering and Naval Architecture
Department of Design
Chair of Design

Institutional repository: Repository of Faculty of Mechanical Engineering and Naval Architecture University of Zagreb

Cite this document

Barić, V. (2024). Razvoj zatezača remena za bicikl sa stražnjom suspenzijom (Undergraduate thesis). Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:235:721908

Barić, Vedran. "Razvoj zatezača remena za bicikl sa stražnjom suspenzijom." Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2024. https://urn.nsk.hr/urn:nbn:hr:235:721908

Barić, Vedran. "Razvoj zatezača remena za bicikl sa stražnjom suspenzijom." Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2024. https://urn.nsk.hr/urn:nbn:hr:235:721908

Barić, V. (2024). 'Razvoj zatezača remena za bicikl sa stražnjom suspenzijom', Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, accessed 18 December 2024, https://urn.nsk.hr/urn:nbn:hr:235:721908

Barić V. Razvoj zatezača remena za bicikl sa stražnjom suspenzijom [Undergraduate thesis]. Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture; 2024 [cited 2024 December 18] Available at: https://urn.nsk.hr/urn:nbn:hr:235:721908

V. Barić, "Razvoj zatezača remena za bicikl sa stražnjom suspenzijom", Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Zagreb, 2024. Available at: https://urn.nsk.hr/urn:nbn:hr:235:721908

Metadata
TitleRazvoj zatezača remena za bicikl sa stražnjom suspenzijom
Title (english)Development of belt tensioner for bicycle with rear suspension
AuthorVedran Barić
MentorStanko Škec (mentor)
GranterUniversity of Zagreb
Faculty of Mechanical Engineering and Naval Architecture
(Department of Design)
(Chair of Design)
Zagreb
Defense date and country2024-09-25, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
General Mechanical Engineering (Construction)
Abstract
U ovom radu prikazan je razvoj zatezača remena za bicikl sa stražnjom suspenzijom. Razvoj je započet kratkim uvodom i prikazom problema kojeg je potrebno riješiti. Potom je provedena analiza patenata i postojećih proizvoda na tržištu. Pomoću funkcijske dekompozicije i morfološke matrice koja iz nje slijedi – generirana su tri koncepta zatezača remena za bicikl sa stražnjom suspenzijom. Na temelju vrednovanja izabran je koncept za daljnju konstrukcijsku razradu. Nakon konstrukcijske razrade model zatezača remena kontroliran je numeričkom analizom metode konačnih elemenata. Također, proveden je i dinamički proračun sigurnosti ležaja i tijela zatezača. Nad usvojenim modelom, nakon zadovoljavanja proračuna, proveden je proces topološke optimizacije. Na koncu su izvršene konačne evaluacije novog modela pomoću prethodno spomenutih metoda. Konačno rješenje je diskutirano i predloženi su eventualni pravci daljnjeg razvoja zatezača remena.
Abstract (english)
The topic of this thesis is the development of belt tensioner for bicycle with rear suspension. The development was started with a short introduction and presentation of the problem that needs to be solved. An analysis of patents and existing products on the market was then carried out. By means of the functional decomposition and the morphological matrix that follows from it – three concepts of belt tensioners for bicycle with rear suspension were generated. Based on the evaluation, a concept was chosen for further design development. After the design development, the belt tensioner model was controlled by numerical analysis of the finite element method. Also, a dynamic calculation of the safety of the bearing and tensioner body was carried out. After satisfying the engineering analysis, the topological optimization process was carried out over the adopted model. Finally, the final evaluations of the new model were performed using the previously mentioned methods. The final solution was discussed and possible directions for further development of the belt tensioner were proposed.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:235:721908
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (sveučilišni/a prvostupnik/prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsEmbargoed access
Embargo expiration date: 2026-09-23
Terms of useLicence In copyright icon
Created on2024-09-23 11:36:00