prikaz prve stranice dokumenta Primjena SMED metode pri izmjeni alata
  Download
PDF 3.23 MB
master's thesis
Primjena SMED metode pri izmjeni alata
Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2014. urn:nbn:hr:235:486246
Lekšić, Ivan
University of Zagreb
Faculty of Mechanical Engineering and Naval Architecture

Institutional repository: Repository of Faculty of Mechanical Engineering and Naval Architecture University of Zagreb

Cite this document

Lekšić, I. (2014). Primjena SMED metode pri izmjeni alata (Master's thesis). Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:235:486246

Lekšić, Ivan. "Primjena SMED metode pri izmjeni alata." Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2014. https://urn.nsk.hr/urn:nbn:hr:235:486246

Lekšić, Ivan. "Primjena SMED metode pri izmjeni alata." Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2014. https://urn.nsk.hr/urn:nbn:hr:235:486246

Lekšić, I. (2014). 'Primjena SMED metode pri izmjeni alata', Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, accessed 26 June 2024, https://urn.nsk.hr/urn:nbn:hr:235:486246

Lekšić I. Primjena SMED metode pri izmjeni alata [Master's thesis]. Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture; 2014 [cited 2024 June 26] Available at: https://urn.nsk.hr/urn:nbn:hr:235:486246

I. Lekšić, "Primjena SMED metode pri izmjeni alata", Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Zagreb, 2014. Available at: https://urn.nsk.hr/urn:nbn:hr:235:486246

Metadata
TitlePrimjena SMED metode pri izmjeni alata
Title (english)Application of SMED method for tools change over process
AuthorIvan Lekšić
MentorNedeljko Štefanić (mentor)
GranterUniversity of Zagreb
Faculty of Mechanical Engineering and Naval Architecture
Zagreb
Defense date and country2014-07-17, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
Single-Minute Exchange of Die (SMED) je jedna od mnogih metoda lean proizvodnje za smanjenje troškova u proizvodnom procesu. SMED metodolgija je vjerojatno najefikasniji alat za smanjenje vremena potrebnog za izmjenu alata. Sama bit SMED metodologije je pretvorba što više aktivnosti tijekom izmjene alata u "vanjske" (one koje se odvijaju dok stroj radi), te pojednostavljenje "unutarnjih" aktivnosti (one koje se odvijaju dok stroj stoji). Samo ime ove metode Single-Minute Exchange of Dies dolazi od zamisli da svaka izmjena alata u proizvodnji bi se trebala obaviti unutar deset minuta. Ovaj rad se sastoji od dva dijela. Prva poglavlja se bave problemima i ilustriraju ideje što se može postići primjenom ove metode, dok se druga poglavlja bave opisivanjem SMED alata, te kako ih pravilno koristiti.
Abstract (english)
Single-Minute Exchange of Die (SMED) is one of the many lean production [1] methods for reducing waste in a manufacturing process. SMED methodology is probably the most efficient way to reduce set-up time. The essence of the SMED methodology is to convert as many changeover steps as possible to "external" (performed while the equipment is running), and to simplify the "internal" steps (performed while the equipment is not running). The name Single-Minute Exchange of Dies comes from the goal of reducing changeover times to the "single" digits (less than 10 minutes). This thesis is composed of two sections. First chapters discuss and illustrate the ideas and logic of what we are trying to accomplish by adopting SMED method, whereas second chapters illustrate some of the tools of SMED and how to put them in good use.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:235:486246
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2019-05-22 11:18:55