prikaz prve stranice dokumenta Utjecaj debljine stijenke na mehanička svjstva nodularnog lijeva
  Download
PDF 4.14 MB
master's thesis
Utjecaj debljine stijenke na mehanička svjstva nodularnog lijeva
Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2014. urn:nbn:hr:235:823487
Ščurić, Ivan
University of Zagreb
Faculty of Mechanical Engineering and Naval Architecture

Institutional repository: Repository of Faculty of Mechanical Engineering and Naval Architecture University of Zagreb

Cite this document

Ščurić, I. (2014). Utjecaj debljine stijenke na mehanička svjstva nodularnog lijeva (Master's thesis). Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:235:823487

Ščurić, Ivan. "Utjecaj debljine stijenke na mehanička svjstva nodularnog lijeva." Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2014. https://urn.nsk.hr/urn:nbn:hr:235:823487

Ščurić, Ivan. "Utjecaj debljine stijenke na mehanička svjstva nodularnog lijeva." Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2014. https://urn.nsk.hr/urn:nbn:hr:235:823487

Ščurić, I. (2014). 'Utjecaj debljine stijenke na mehanička svjstva nodularnog lijeva', Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, accessed 19 December 2024, https://urn.nsk.hr/urn:nbn:hr:235:823487

Ščurić I. Utjecaj debljine stijenke na mehanička svjstva nodularnog lijeva [Master's thesis]. Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture; 2014 [cited 2024 December 19] Available at: https://urn.nsk.hr/urn:nbn:hr:235:823487

I. Ščurić, "Utjecaj debljine stijenke na mehanička svjstva nodularnog lijeva", Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Zagreb, 2014. Available at: https://urn.nsk.hr/urn:nbn:hr:235:823487

Metadata
TitleUtjecaj debljine stijenke na mehanička svjstva nodularnog lijeva
Title (english)Influence of wall thickness of casting on microstructure and properties of ductile iron
AuthorIvan Ščurić
MentorBranko Bauer (mentor)
GranterUniversity of Zagreb
Faculty of Mechanical Engineering and Naval Architecture
Zagreb
Defense date and country2014-07-17, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U radu je analiziran utjecaj debljine stijenke na mehanička svojstva nodularnog lijeva. Rad se sastoji od dva dijela: teorijskog i eksperimentalnog. U teorijskom dijelu ukratko su objašnjena svojstva i primjena nodularnog lijeva. Također je prikazana i klasifikacija nodularnog lijeva, njegovo skrućivanje te utjecaj kemijskog sastava i mikrostrukture na mehanička svojstva lijeva. Osim elemenata koji utječu na svojstva i mikrostrukturu, prikazan je i utjecaj nodularnosti grafita te broja i veličine nodula na mehanička svojstva i mikrostrukturu. U eksperimentalnom dijelu ispitivan je utjecaj različite debljine stijenke na odljevke od nodularnog lijeva kvalitete EN GJS 400 – 15. Odlivene su Y – probe tri različite debljine i na tim ispitnim uzorcima su provedena metalografska i mehanička ispitivanja. Također je u sklopu rada ispitan i utjecaj različitog CE na mikrostrukturu i mehanička svojstva. Na temelju dobivenih rezultata utvrđeno je da svi odljevci pripadaju nodularnom lijevu EN GJS 400 – 15 te kako debljina stijenke utječe na mehanička svojstva.
Abstract (english)
This paper analyzes the influence of wall thickness on mechanical properties of ductile iron. It is composed of two parts: theoretical and experimental. In theoretical part properties and application are briefly discussed. There is a overview of ductile iron classification, its solidification and the influence of chemical composition and microstructure on mechanical properties. It is also shown the influence of graphite nodularity and the number and the size of nodules on mechanical properties and microstructure. In the experimental part influence of different wall thickness on ductile iron quality EN GJS 400 - 15 was tested. Y – probes with different wall thickness were casted and metallographic and mechanical testing were performed on this test samples. The influence of different CE on microstructure and mechanical properties was also tested. On the basis of the obtained results it was shown that the tested castings belong to the ductile iron EN GJS 400 – 15 and that the thickness affects on mechanical properties
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:235:823487
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2019-05-22 11:22:52