prikaz prve stranice dokumenta Podešavanje parametara prerade kod taložnog očvršćivanja
Access restricted to students and staff of home institution
undergraduate thesis
Podešavanje parametara prerade kod taložnog očvršćivanja
Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2014. urn:nbn:hr:235:139593
Vojvodić, Andreja Leonela
University of Zagreb
Faculty of Mechanical Engineering and Naval Architecture

Institutional repository: Repository of Faculty of Mechanical Engineering and Naval Architecture University of Zagreb

Cite this document

Vojvodić, A. L. (2014). Podešavanje parametara prerade kod taložnog očvršćivanja (Undergraduate thesis). Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:235:139593

Vojvodić, Andreja Leonela. "Podešavanje parametara prerade kod taložnog očvršćivanja." Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2014. https://urn.nsk.hr/urn:nbn:hr:235:139593

Vojvodić, Andreja Leonela. "Podešavanje parametara prerade kod taložnog očvršćivanja." Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2014. https://urn.nsk.hr/urn:nbn:hr:235:139593

Vojvodić, A. L. (2014). 'Podešavanje parametara prerade kod taložnog očvršćivanja', Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, accessed 19 December 2024, https://urn.nsk.hr/urn:nbn:hr:235:139593

Vojvodić AL. Podešavanje parametara prerade kod taložnog očvršćivanja [Undergraduate thesis]. Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture; 2014 [cited 2024 December 19] Available at: https://urn.nsk.hr/urn:nbn:hr:235:139593

A. L. Vojvodić, "Podešavanje parametara prerade kod taložnog očvršćivanja", Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Zagreb, 2014. Available at: https://urn.nsk.hr/urn:nbn:hr:235:139593

Metadata
TitlePodešavanje parametara prerade kod taložnog očvršćivanja
Title (english)Setting of processing parameters for fused deposition modeling
AuthorAndreja Leonela Vojvodić
MentorMladen Šercer (mentor)
GranterUniversity of Zagreb
Faculty of Mechanical Engineering and Naval Architecture
Zagreb
Defense date and country2014-09-22, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U ovom završnom radu objašnjeni su parametri prerade kod taložnog očvršćivanja. Taložno očvršćivanje je jedan od aditivnih postupaka proizvodnje koji u zadnje vrijeme postaju sve jednostavniji i isplativiji pri izradi prototipova, ali i gotovih proizvoda. Izrađuju tvorevinu izravno iz 3D modela u relativno kratkom vremenu, dostupni su, jednostavni i isplativi. Prilagodbom parametara unutar programa, moguće je utjecati na izgled tvorevine, brzinu i vrijeme izrade te mnoge druge karakteristike izrađivanog dijela. Proizvođači 3D pisača ostavljaju pojedine skupine parametara otvorenim, kako bi korisnici, njihovom izmjenom mogli ispuniti vlastite zahtjeve na proizvod. Eksperimentalni dio rada sastoji se od objašnjenja parametara prerade i izrade tvorevina na stroju Replicator 2X. Promjenom određenih parametara u MakerBot MakeWare programu vidljive su razlike u geometriji dijela što je popraćeno slikama. Navedeni su parametri koji najviše utječu na sam izgled i kvalitetu izrađivane tvorevine, ali i pogreške koje mogu nastati prilikom loše kombinacije pojedinih parametara.
Abstract (english)
This bachelor thesis explains the setting of processing parameters for fused deposition modeling. Fused deposition modeling is one of the additive manufacturing processes which lately have become increasingly simpler and more cost-effective in the preparation of prototypes and finished products. Additive processes make a product directly from a 3D model, in a relatively short time and they are available, easy and profitable. By adjusting the parameters within the program, it is possible to affect the appearance of the creation, the printing speed and time and many other features of the making part. 3D printer manufacturers leave individual parameter groups open, so that users, changing them can realize their own requirements on the product. The experimental part of the work consists of the explanations of processing parameters and creating parts on the 3D printer Replicator 2X. By changing certain parameters in Makerbot MakeWare program, it is possible to see differences in the geometry of the part which are accompanied by pictures. In addition, there are explanations of the parameters that most affect the appearance and quality of the making creation and errors that can occur when a bad combination of individual parameters is used.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:235:139593
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2019-05-22 11:29:31