prikaz prve stranice dokumenta Ispitivanje termostatirane vodene kupke za visokotemperaturni generator vlažnosti
  Download
PDF 1.94 MB
undergraduate thesis
Ispitivanje termostatirane vodene kupke za visokotemperaturni generator vlažnosti
Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2014. urn:nbn:hr:235:971910
Mustać, Marin
University of Zagreb
Faculty of Mechanical Engineering and Naval Architecture

Institutional repository: Repository of Faculty of Mechanical Engineering and Naval Architecture University of Zagreb

Cite this document

Mustać, M. (2014). Ispitivanje termostatirane vodene kupke za visokotemperaturni generator vlažnosti (Undergraduate thesis). Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:235:971910

Mustać, Marin. "Ispitivanje termostatirane vodene kupke za visokotemperaturni generator vlažnosti." Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2014. https://urn.nsk.hr/urn:nbn:hr:235:971910

Mustać, Marin. "Ispitivanje termostatirane vodene kupke za visokotemperaturni generator vlažnosti." Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2014. https://urn.nsk.hr/urn:nbn:hr:235:971910

Mustać, M. (2014). 'Ispitivanje termostatirane vodene kupke za visokotemperaturni generator vlažnosti', Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, accessed 27 December 2024, https://urn.nsk.hr/urn:nbn:hr:235:971910

Mustać M. Ispitivanje termostatirane vodene kupke za visokotemperaturni generator vlažnosti [Undergraduate thesis]. Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture; 2014 [cited 2024 December 27] Available at: https://urn.nsk.hr/urn:nbn:hr:235:971910

M. Mustać, "Ispitivanje termostatirane vodene kupke za visokotemperaturni generator vlažnosti", Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Zagreb, 2014. Available at: https://urn.nsk.hr/urn:nbn:hr:235:971910

Metadata
TitleIspitivanje termostatirane vodene kupke za visokotemperaturni generator vlažnosti
Title (english)Performance testing of thermostated water bath used for high-temperature dew-point generator
AuthorMarin Mustać
MentorDavor Zvizdić (mentor)
GranterUniversity of Zagreb
Faculty of Mechanical Engineering and Naval Architecture
Zagreb
Defense date and country2014-09-24, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U radu je provedeno ispitivanje karakteristika termostatirane vodene kupke kakva se najčešće koristi za umjeravanje termometara, no u ovom slučaju koristi se kao izmjenjivački medij za kontrolu temperature visokotemperaturnog generatora vlažnosti. Opisane su karakteristike i način rada generatora vlažnosti za temperature od +1 °C do +65 °C. U svrhu što točnijih rezultata ispitivanja kupke, prethodno je bilo potrebno umjeriti termometre koji su se koristili u procesu. Termostatirane kupke ispituju se zbog utvrđivanja homogenosti (aksijalnih i radijalnih gradijenata) i stabilnosti temperature u njima, koji su ujedno i kriteriji kvalitete konstrukcije kupke. Prikazana je metoda provjere navedenih parametara. Na kraju rada, izloženi su rezultati ispitivanja popraćeni odgovarajućim grafovima i tablicama.
Abstract (english)
The work is about testing the characteristics of calibration bath, most commonly used for calibration of thermometers. In this case bath was used as thermally controlled environment for accommodation of the high-temperature dew-point generator. The characteristics and operating principle of the dew-point generator in temperature range from +1 °C to +65 °C are evaluated. For achieving the higher accuracy of the bath test results, thermometers used during testing were previously calibrated. Calibration baths are tested to determine the homogeneity (axial and radial gradients) and the stability of temperature, that are also quality indicators for calibration baths. A procedure for evaluation of these parameters is demonstrated. The test results are accompanied by corresponding graphs and tables at the end of the paper.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:235:971910
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2019-05-22 11:30:12