prikaz prve stranice dokumenta Projektiranje laboratorijskog stola za umjeravanje mjerila tlaka
  Download
PDF 2.87 MB
master's thesis
Projektiranje laboratorijskog stola za umjeravanje mjerila tlaka
Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2014. urn:nbn:hr:235:574707
Terbovc, Siniša
University of Zagreb
Faculty of Mechanical Engineering and Naval Architecture

Institutional repository: Repository of Faculty of Mechanical Engineering and Naval Architecture University of Zagreb

Cite this document

Terbovc, S. (2014). Projektiranje laboratorijskog stola za umjeravanje mjerila tlaka (Master's thesis). Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:235:574707

Terbovc, Siniša. "Projektiranje laboratorijskog stola za umjeravanje mjerila tlaka." Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2014. https://urn.nsk.hr/urn:nbn:hr:235:574707

Terbovc, Siniša. "Projektiranje laboratorijskog stola za umjeravanje mjerila tlaka." Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2014. https://urn.nsk.hr/urn:nbn:hr:235:574707

Terbovc, S. (2014). 'Projektiranje laboratorijskog stola za umjeravanje mjerila tlaka', Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, accessed 26 December 2024, https://urn.nsk.hr/urn:nbn:hr:235:574707

Terbovc S. Projektiranje laboratorijskog stola za umjeravanje mjerila tlaka [Master's thesis]. Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture; 2014 [cited 2024 December 26] Available at: https://urn.nsk.hr/urn:nbn:hr:235:574707

S. Terbovc, "Projektiranje laboratorijskog stola za umjeravanje mjerila tlaka", Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Zagreb, 2014. Available at: https://urn.nsk.hr/urn:nbn:hr:235:574707

Metadata
TitleProjektiranje laboratorijskog stola za umjeravanje mjerila tlaka
Title (english)Design of laboratory bench for calibration of pressue gauges
AuthorSiniša Terbovc
MentorLovorka Grgec Bermanec (mentor)
GranterUniversity of Zagreb
Faculty of Mechanical Engineering and Naval Architecture
Zagreb
Defense date and country2014-12-05, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
Za potrebe umjeravanja uljnih tlačnih vaga i pretvornika tlaka u području srednjih i visokih tlakova (0 do 2000 bar) cilj ovoga rada bio je projektirati laboratorijski ispitni stol kao dio etalonskog mjernog sustava. Kako bi se kvalitetno pristupilo zadanoj problematici, obrađene su teorijske osnove principa rada tlačnih vaga u raznim režimima rada zajedno sa pregledom i opisom postojećih etalonskih sklopova klip/cilindar u posjedu LPM laboratorija. Također su dane i objašnjene glavne smjernice za postupke umjeravanja po europskim standardima. U projektnom dijelu rada osmišljen je i dimenzioniran potpuno funkcionalan ispitni stol zajedno sa ostalom opremom za potrebe umjeravanja mjerila tlaka. Projektiranje stola baziralo se na postavljanju glavnih i induktivnih zahtjeva sa svrhom povećanja ukupne funkcionalnosti i opsega rada stola. Cijeli proces razrade i projektiranja stola može se paralelno pratiti putem blok-dijagrama razvoja stola koji se nalazi u Prilogu II - Tehnička dokumentacija na kraju rada.
Abstract (english)
For the need of pressure gauge and other pressure transducer calibration, in mid to high pressure range (0 to 2000 bar), the aim of this work was designing a laboratory test bench as part of a standard measuring system. For better approach to the given subject, theoretical background of pressure gauges was covered alongside with an overview and description of existing clip/cylinder assemblies. European standard guidance tips for calibration were also covered. In experimental part of this work, a fully functional testing bench was designed with given dimensions, alongside with other equipment needed for calibration purposes. The design of a test bench was based on setting up main and inductive demands with a general purpose of increasing the main functionality and scope of work. The entire designing process can be monitored via block diagram given in Inset II – Technical documentation at the end of this work.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:235:574707
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2019-05-22 12:23:37