prikaz prve stranice dokumenta Optimizacija vršne potrošnje procesne pare
  Download
PDF 3.89 MB
master's thesis
Optimizacija vršne potrošnje procesne pare
Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2015. urn:nbn:hr:235:217292
Hmura, Kristijan
University of Zagreb
Faculty of Mechanical Engineering and Naval Architecture

Institutional repository: Repository of Faculty of Mechanical Engineering and Naval Architecture University of Zagreb

Cite this document

Hmura, K. (2015). Optimizacija vršne potrošnje procesne pare (Master's thesis). Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:235:217292

Hmura, Kristijan. "Optimizacija vršne potrošnje procesne pare." Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2015. https://urn.nsk.hr/urn:nbn:hr:235:217292

Hmura, Kristijan. "Optimizacija vršne potrošnje procesne pare." Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2015. https://urn.nsk.hr/urn:nbn:hr:235:217292

Hmura, K. (2015). 'Optimizacija vršne potrošnje procesne pare', Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, accessed 16 June 2024, https://urn.nsk.hr/urn:nbn:hr:235:217292

Hmura K. Optimizacija vršne potrošnje procesne pare [Master's thesis]. Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture; 2015 [cited 2024 June 16] Available at: https://urn.nsk.hr/urn:nbn:hr:235:217292

K. Hmura, "Optimizacija vršne potrošnje procesne pare", Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Zagreb, 2015. Available at: https://urn.nsk.hr/urn:nbn:hr:235:217292

Metadata
TitleOptimizacija vršne potrošnje procesne pare
Title (english)Process steam peak demand optimisation
AuthorKristijan Hmura
MentorDražen Lončar (mentor)
GranterUniversity of Zagreb
Faculty of Mechanical Engineering and Naval Architecture
Zagreb
Defense date and country2015-01-23, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Process Energy Engineering
Abstract
Tema ovog rada je smanjenje vršne potrošnje tehnološke pare kod šaržnih industrijskih procesa. Posljedica smanjenja vršne potrošnje je smanjenje troškova zakupa snage u slučaju opskrbe tehnološkom parom od vanjskog dobavljača. Kao podloga za analizu mogućih načina smanjenja vršnog opterećenja poslužilo je realno postrojenje za proces bojanja konca budući da je to tipičan šaržni proces s diskontinuiranom potrošnjom pare. Provedena je analiza potrošnje pare na osnovu koje je uspoređeno nekoliko mogućnosti za smanjenje vršne potrošnje. Razmotrene su mogućnosti reorganizacije tehnološkog procesa, ugradnje akumulatora pare i električnog vršnog kotla za pokrivanje vršnih opterećenja te mogućnost pokrivanja baznog opterećenja kogeneracijom na bazi plinskih motora u kombinaciji s akumulatorom pare za pokrivanje vršne potrošnje. U svrhu evaluacije scenarija napravljena je tehno-ekonomska analiza svakog scenarija. U analizi scenarija s akumulatorom pare su korišteni matematički modeli punjenja i pražnjenja akumulatora pare izrađeni u SIMULINK-u. Na kraju je pomoću matematičkog modela dimenzioniran akumulator za promatrano postrojenje te je izrađen proračun i nacrtan odgovarajući nacrt akumulatora.
Abstract (english)
The subject of this master thesis is covering peak demands of process steam in batch industrial processes. Lowering peak demands results in reduced energy supply costs by an external supplier. As a basis for an analysis of reducing the peak demands, the real yarn dying process industry was used since it is a typical batch process with discontinuous steam consumption. Possibilities which were considered include reorganization of the technological process, installation of a steam accumulator and electric boiler to cover peak demands and covering base demands with cogeneration based on internal combustion engines combined with a steam accumulator for covering peak demands. In order to evaluate these scenarios, techno-economic analysis of each scenario was performed. A mathematical model of a steam accumulator for charging and discharging was made in SIMULINK-in and then used for scenario analysis. In the end, a steam accumulator was dimensioned based on data from mathematical model results. Design and a layout were also made.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:235:217292
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2019-05-22 12:33:16