prikaz prve stranice dokumenta Analiza procesa deformiranja dijelova ispušnog kućišta plinske turbine
  Download
PDF 3.08 MB
undergraduate thesis
Analiza procesa deformiranja dijelova ispušnog kućišta plinske turbine
Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2015. urn:nbn:hr:235:019700
Obradović, Ana
University of Zagreb
Faculty of Mechanical Engineering and Naval Architecture

Institutional repository: Repository of Faculty of Mechanical Engineering and Naval Architecture University of Zagreb

Cite this document

Obradović, A. (2015). Analiza procesa deformiranja dijelova ispušnog kućišta plinske turbine (Undergraduate thesis). Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:235:019700

Obradović, Ana. "Analiza procesa deformiranja dijelova ispušnog kućišta plinske turbine." Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2015. https://urn.nsk.hr/urn:nbn:hr:235:019700

Obradović, Ana. "Analiza procesa deformiranja dijelova ispušnog kućišta plinske turbine." Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2015. https://urn.nsk.hr/urn:nbn:hr:235:019700

Obradović, A. (2015). 'Analiza procesa deformiranja dijelova ispušnog kućišta plinske turbine', Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, accessed 25 June 2024, https://urn.nsk.hr/urn:nbn:hr:235:019700

Obradović A. Analiza procesa deformiranja dijelova ispušnog kućišta plinske turbine [Undergraduate thesis]. Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture; 2015 [cited 2024 June 25] Available at: https://urn.nsk.hr/urn:nbn:hr:235:019700

A. Obradović, "Analiza procesa deformiranja dijelova ispušnog kućišta plinske turbine", Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Zagreb, 2015. Available at: https://urn.nsk.hr/urn:nbn:hr:235:019700

Metadata
TitleAnaliza procesa deformiranja dijelova ispušnog kućišta plinske turbine
Title (english)Analysis of deformation processes of gas turbine exhaust housing parts
AuthorAna Obradović
MentorZdenko Tonković (mentor)
GranterUniversity of Zagreb
Faculty of Mechanical Engineering and Naval Architecture
Zagreb
Defense date and country2015-02-26, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U ovome radu, u okviru projekta pod nazivom Razvoj i poboljšanje ispušnog sustava plinskih turbina (eng. Gas Turbine Exhaust System Enhanced Design), koji se provodi u suradnji Fakulteta strojarstva i brodogradnje i tvrtke Alstom iz Karlovca izrađen je proračun kućišta plinske turbine GT26 čije su glavne karakteristike veći stupanj iskoristivosti pri manjem opterećenju okoliša ispušnim plinovima. Za dobiveni model provedeno je modeliranje i računalna simulacija procesa deformiranja dijelova konstrukcije ispušnog kućišta plinske turbine tvrtke Alstom. Proračun je najprije vršen za jednostavniju konstrukciju (pravokutna ploča) analitički, te numerički u programskom paketu Abaqus/Standard. Izvršena je verifikacija konačnih elemenata pomoću pravokutnih 3D konačnih elemenata, te potom i ljuskastih konačnih elemenata. Nakon toga je izvršena numerička analiza kućišta plinske turbine GT26 također u Abaqus/Standard paketu. Zbog uvjeta simetrije analizirat će se jedna desetina linera. Da bi se postiglo bolje pozicioniranje linera prije zavarivanja i da bi se nakon zavarivanja dobila što bolja cilindričnost ljuske dolazi do deformiranja ljuske. To deformiranje uzrokuje nastanak zaostalih naprezanja zbog kojih dolazi do prednapinjanja ljuske, tj. preddeformacije prije zavarivanja. Izmjereni pomaci nastali nakon preddeformacije dobiveni su od tvrtke Alstom, na temelju kojih su u ovom radu zadana opterećenja na ljusci. Opterećenja su najprije pretpostavljana tlakom po pojedinim površinama, a zatim tlakom po pojasu ljuske, tj. po duljini ljuske u cirkularnom smjeru.
Abstract (english)
In this paper work, within the project named Gas Turbine Exhaust System Enchased Design, which is carried out in cooperation Faculty of Mechanical Engineering and Naval Arhitecture and Alstom company from Karlovac, it is given a calculation of gas turbine GT26 casing, whose main characteristics are a higher degree of efficiency at partial load enviroment with exhaust gases. For given model was carried out modeling and computer simulation of deformation processes of construction parts of gas turbine case made by Alstom company. Calculation was first carried out for a simple construction (rectangular plate) analytical and then numerically in the softwer package Abaqus/Standard. There was made a verification of finite elements using 3D rectangular finite elements and then using shell finite elements. Following numerical analysis of the gas turbine GT26 casing was also carried out in softwer package Abaqus/Standard. Because of the symmetry conditions, there was analyzed only tenth liner. To achieve a better positioning of the liner before welding and to obtain the best possible cylindricity of shell after welding, shell comes to its deformation. This deformation causes the formation of residual stresses which occur due to prestressing shell, which means predeformation before welding. The measured displacements which occur after predeforming were obtained from Alstom company. On the basis of those displacements work load by shell were given. Loads were first given on the surfaces of a shell and then by her length in the circular direction.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:235:019700
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2019-05-22 13:08:24