prikaz prve stranice dokumenta Optimizacija parametara bradavičastog elektrootpornog zavarivanja sklopa žica-cijev
  Download
PDF 3.54 MB
master's thesis
Optimizacija parametara bradavičastog elektrootpornog zavarivanja sklopa žica-cijev
Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2015. urn:nbn:hr:235:963690
Puče, Andro
University of Zagreb
Faculty of Mechanical Engineering and Naval Architecture

Institutional repository: Repository of Faculty of Mechanical Engineering and Naval Architecture University of Zagreb

Cite this document

Puče, A. (2015). Optimizacija parametara bradavičastog elektrootpornog zavarivanja sklopa žica-cijev (Master's thesis). Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:235:963690

Puče, Andro. "Optimizacija parametara bradavičastog elektrootpornog zavarivanja sklopa žica-cijev." Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2015. https://urn.nsk.hr/urn:nbn:hr:235:963690

Puče, Andro. "Optimizacija parametara bradavičastog elektrootpornog zavarivanja sklopa žica-cijev." Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2015. https://urn.nsk.hr/urn:nbn:hr:235:963690

Puče, A. (2015). 'Optimizacija parametara bradavičastog elektrootpornog zavarivanja sklopa žica-cijev', Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, accessed 27 December 2024, https://urn.nsk.hr/urn:nbn:hr:235:963690

Puče A. Optimizacija parametara bradavičastog elektrootpornog zavarivanja sklopa žica-cijev [Master's thesis]. Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture; 2015 [cited 2024 December 27] Available at: https://urn.nsk.hr/urn:nbn:hr:235:963690

A. Puče, "Optimizacija parametara bradavičastog elektrootpornog zavarivanja sklopa žica-cijev", Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Zagreb, 2015. Available at: https://urn.nsk.hr/urn:nbn:hr:235:963690

Metadata
TitleOptimizacija parametara bradavičastog elektrootpornog zavarivanja sklopa žica-cijev
Title (english)Optimization of parameters in resistance projection welding of wire-tube assembly
AuthorAndro Puče
MentorIvica Garašić (mentor)
GranterUniversity of Zagreb
Faculty of Mechanical Engineering and Naval Architecture
Zagreb
Defense date and country2015-07-16, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Production Mechanical Engineering
Abstract
U radu je opisan postupak elektrootpornog zavarivanja s naglaskom na bradavičasto zavarivanje. Opisane su značajke elektrootpornog zavarivanja kao što su parametri zavarivanja, geometrija elektroda, materijal elektroda i drugo. Opisane su i pogreške koje su mogu pojaviti te način ispitivanja zavara. U eksperimentalnom dijelu, koji je izveden u tvrtci ZM-Vikom te u Laboratoriju za Zavarene konstrukcije Fakulteta strojarstva i brodogradnje u Zagrebu, zavareno je osam sklopova žica-cijev te je svaki od sklopova zavaren sa različitim parametrima. Žice su bile podijeljene u dvije vrste, s višom i s nižom vrijednosti vlačne čvrstoće. Cilj je bio povećati proizvodnost sklopova žica-cijev te optimirati parametre zavarivanja, odnosno pronaći odgovarajuće zajedničke parametre za sklopove s obe vrste žica. Nakon zavarivanja, izvedena su različita ispitivanja mehaničkih svojstava te su analizirani rezultati.
Abstract (english)
The paper described the procedure for resistance welding with an emphasis on the projection welding. It described features of resistance welding, such as welding parameters, electrode geometry, the electrode material and more. It described the errors that can occur and the method of testing welds. In the experimental section, which was performed in the company ZM-Vikom and the Laboratory for Welded structures of the Faculty of Mechanical Engineering and Naval Architecture in Zagreb, eight wire – tube assemblies were welded and each with different parameters. Wires were divided into two species, with a higher and with a lower tensile strength. The aim was to increase productivity of assemblies wire - pipe and to optimize welding parameters and to find suitable common parameters for using both types of wires. After welding, different mechanical tests were performed and the results were analyzed.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:235:963690
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2019-05-22 13:35:58