prikaz prve stranice dokumenta Jarosit kao punilo za kompozite na bazi poliesterske smole
  Download
PDF 3.81 MB
master's thesis
Jarosit kao punilo za kompozite na bazi poliesterske smole
Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2015. urn:nbn:hr:235:481652
Primorac, Ivan
University of Zagreb
Faculty of Mechanical Engineering and Naval Architecture

Institutional repository: Repository of Faculty of Mechanical Engineering and Naval Architecture University of Zagreb

Cite this document

Primorac, I. (2015). Jarosit kao punilo za kompozite na bazi poliesterske smole (Master's thesis). Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:235:481652

Primorac, Ivan. "Jarosit kao punilo za kompozite na bazi poliesterske smole." Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2015. https://urn.nsk.hr/urn:nbn:hr:235:481652

Primorac, Ivan. "Jarosit kao punilo za kompozite na bazi poliesterske smole." Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2015. https://urn.nsk.hr/urn:nbn:hr:235:481652

Primorac, I. (2015). 'Jarosit kao punilo za kompozite na bazi poliesterske smole', Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, accessed 18 May 2024, https://urn.nsk.hr/urn:nbn:hr:235:481652

Primorac I. Jarosit kao punilo za kompozite na bazi poliesterske smole [Master's thesis]. Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture; 2015 [cited 2024 May 18] Available at: https://urn.nsk.hr/urn:nbn:hr:235:481652

I. Primorac, "Jarosit kao punilo za kompozite na bazi poliesterske smole", Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Zagreb, 2015. Available at: https://urn.nsk.hr/urn:nbn:hr:235:481652

Metadata
TitleJarosit kao punilo za kompozite na bazi poliesterske smole
Title (english)Jarosite as filler for composite based on polyester resin
AuthorIvan Primorac
MentorLidija Ćurković (mentor)
GranterUniversity of Zagreb
Faculty of Mechanical Engineering and Naval Architecture
Zagreb
Defense date and country2015-07-09, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
Cilj ovog rada je ispitati mogućnost primjene otpadnog jarosita kao punila u kompozitu poliesterske smole ojačane staklenim vlaknima. U prvom dijelu rada dan je opći prikaz podjele kompozita, građe polimernih kompozita, svojstva, vrste i primjene polimernih kompozita. U eksperimentalnom dijelu rada prikazana je izrada kompozitnog materijala s matricom od poliesterske smole ojačane staklenim vlaknima te izrada kompozita s matricom od poliesterske smole ojačane staklenim vlaknima uz dodatak čestica jarosita kao punila masenog udjela od 5 %, 10 % i 20 %. Pripravljenim kompozitima ispitana su sljedeća mehaničkih svojstava: savojna čvrstoća i savojni modul elastičnosti, međuslojna smična čvrstoća, tvrdoća i žilavost. Najbolja mehanička svojstva su postignuta za poliestersku smolu ojačanu staklenim vlaknima uz dodatak od 10 % čestica jarosita kao punila.
Abstract (english)
The goal of this master thesis is investigation of the possibility of application of jarosite waste as filler in a glass fiber reinforced composite polyester resin. In the first part of master thesis is shown general division of composite materials, structure of polymer composites, properties, types and application of polymer composites. In the experimental part is shown the production of glass fiber reinforced composite polyester resin as well as production of glass fiber reinforced composite polyester resin with the addition of particles of jarosite as filler in various mass fraction of 5%, 10 % and 20 %. After the production of composites, following mechanical properties were measured: bending strength and flexural modulus of elasticity, interlaminar shear strength, hardness and toughness. The best mechanical properties were obtained for the polyester resin reinforced with glass fibers with the addition of 10% jarosite particles as fillers.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:235:481652
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2019-05-22 13:55:21