prikaz prve stranice dokumenta Zračna mikroturbina sa ejektorom
  Download
PDF 976.15 KB
undergraduate thesis
Zračna mikroturbina sa ejektorom
Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2015. urn:nbn:hr:235:411992
Jelić, Tin
University of Zagreb
Faculty of Mechanical Engineering and Naval Architecture

Institutional repository: Repository of Faculty of Mechanical Engineering and Naval Architecture University of Zagreb

Cite this document

Jelić, T. (2015). Zračna mikroturbina sa ejektorom (Undergraduate thesis). Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:235:411992

Jelić, Tin. "Zračna mikroturbina sa ejektorom." Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2015. https://urn.nsk.hr/urn:nbn:hr:235:411992

Jelić, Tin. "Zračna mikroturbina sa ejektorom." Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2015. https://urn.nsk.hr/urn:nbn:hr:235:411992

Jelić, T. (2015). 'Zračna mikroturbina sa ejektorom', Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, accessed 11 July 2024, https://urn.nsk.hr/urn:nbn:hr:235:411992

Jelić T. Zračna mikroturbina sa ejektorom [Undergraduate thesis]. Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture; 2015 [cited 2024 July 11] Available at: https://urn.nsk.hr/urn:nbn:hr:235:411992

T. Jelić, "Zračna mikroturbina sa ejektorom", Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Zagreb, 2015. Available at: https://urn.nsk.hr/urn:nbn:hr:235:411992

Metadata
TitleZračna mikroturbina sa ejektorom
Title (english)Air microturbine with ejector
AuthorTin Jelić
MentorŽeljko Tuković (mentor)
GranterUniversity of Zagreb
Faculty of Mechanical Engineering and Naval Architecture
Zagreb
Defense date and country2015-09-23, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Process Energy Engineering
Abstract
U zračnim mikroturbinama s parcijalnim privodom, posebno ako je parcijalni privod manji od ε=0.07, povoljno je sniziti tlak ispred prvog reda statorskih lopatica korištenjem ejektora. Iako miješanje dviju struja u ejektoru ima negativan utjecaj na iskoristivost turbine, povećanjem parcijalnosti turbine zbog smanjenja gustoće i povećanja volumenskog protoka radnog fluida u konačnici bi trebalo rezultirati povećanjem iskoristivosti turbine. U ovom završnom radu proračun ejektora je izvršen analitički s obzirom na ulazne podatke: totalni tlak medija na ulazu u ejektor, brzina strujanja medija na ulazu u ejektor, temperatura medija na ulazu u ejektor, uz pretpostavku kritičnog presjeka na izlazu iz mlaznice. Za proračun turbine korišten je tablični kalkulator Microsoft Excel sa zadanim statičkim tlakom na izlazu iz turbine i stupnjem reaktivnosti turbine uz parametre dobivene iz proračuna ejektora, a u drugom slučaju bez ejektora.
Abstract (english)
Reducing the pressure in front of an air microturbine stator blades using injector is suitable, especially if turbine partial admission value ε is less than 0.07. Although mixing of two flow rates in injector generally reduces turbine efficiency, decreasing of density and increasing of the volume flow is followed with enhancment of partiality which should have a positive influence on turbine efficiency. In this bachelor thesis calculation of injector was done analitically, based on input data: total pressure, static temperature and velocity at the injector inlet, with the assumption that the nozzle outlet section was critical. Calculation of turbine was performed using computer programme Microsoft Excel for two cases: one for turbine with injector, and other for turbine without injector. Both calculations are based on input data: static pressure at the turbine outlet and degree of reactivity.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:235:411992
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2019-05-22 14:34:48