prikaz prve stranice dokumenta Ciklus naprezanja u korijenu zuba cilindričnog zupčanika s tankim vijencem
  Download
PDF 2.44 MB
undergraduate thesis
Ciklus naprezanja u korijenu zuba cilindričnog zupčanika s tankim vijencem
Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2016. urn:nbn:hr:235:806552
Čular, Ivan
University of Zagreb
Faculty of Mechanical Engineering and Naval Architecture

Institutional repository: Repository of Faculty of Mechanical Engineering and Naval Architecture University of Zagreb

Cite this document

Čular, I. (2016). Ciklus naprezanja u korijenu zuba cilindričnog zupčanika s tankim vijencem (Undergraduate thesis). Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:235:806552

Čular, Ivan. "Ciklus naprezanja u korijenu zuba cilindričnog zupčanika s tankim vijencem." Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2016. https://urn.nsk.hr/urn:nbn:hr:235:806552

Čular, Ivan. "Ciklus naprezanja u korijenu zuba cilindričnog zupčanika s tankim vijencem." Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2016. https://urn.nsk.hr/urn:nbn:hr:235:806552

Čular, I. (2016). 'Ciklus naprezanja u korijenu zuba cilindričnog zupčanika s tankim vijencem', Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, accessed 20 December 2024, https://urn.nsk.hr/urn:nbn:hr:235:806552

Čular I. Ciklus naprezanja u korijenu zuba cilindričnog zupčanika s tankim vijencem [Undergraduate thesis]. Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture; 2016 [cited 2024 December 20] Available at: https://urn.nsk.hr/urn:nbn:hr:235:806552

I. Čular, "Ciklus naprezanja u korijenu zuba cilindričnog zupčanika s tankim vijencem", Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Zagreb, 2016. Available at: https://urn.nsk.hr/urn:nbn:hr:235:806552

Metadata
TitleCiklus naprezanja u korijenu zuba cilindričnog zupčanika s tankim vijencem
Title (english)Stress cycle in thin rimmed spur gear tooth root
AuthorIvan Čular
MentorKrešimir Vučković (mentor)
GranterUniversity of Zagreb
Faculty of Mechanical Engineering and Naval Architecture
Zagreb
Defense date and country2016-03-02, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U ovom radu analizirati će se ciklus naprezanja korijena zuba opterećenog zadanim momentom. Odrediti će se mjesto maksimalnog naprezanja u korijenu zuba, te usporediti sa mjestom očekivanog maksimalnog naprezanja po ISO 6336. Budući da se zupčanici rotiraju brzinom vrtnje od 10 000 min-1, uzeti će se u obzir i utjecaj centrifugalne sile na promatrani korijen zuba te usporediti sa ciklusom naprezanja bez uračunate centrifugalne sile. Debljina tankog vijenca mijenjati će se tijekom analiza kako bi se promotrio utjecaj koji ima na ciklus naprezanja tokom prolaska zuba kroz zahvat. Također će se promatrati utjecaj veličine sektorskog otvora zupčanika od početnog sektorskog otvora koji obuhvaća sedam zubi do krajnje vrijednosti od jednog zuba. Nakon provedene analize i usporedbe svih spomenutih ciklusa, dobivene vrijednosti usporediti će se s proračunom preko norme ISO 6336.
Abstract (english)
In this paper, gear stress analysis will be carried out to determine a place of maximum root bending stress of a cylindricall gear tooth. Location of the maximum bending stress will then be compared with the place of expected maximum bending stress according to ISO 6336 standard. Since both gears are rotating with a speed of 10 000 rpm, centrifugal force will also be taken into account and compared to results where no centrifugal force was involved. Thickness of a thin rim will also vary to determine the effect it has on a stress cycle, as will the size of a sector opening, starting with the initial value of seven-tooth span to one-tooth span. After analyzing and comparing all of cycles mentioned above, results will be compared with those obtained through ISO 6336 standard.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:235:806552
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2019-05-22 15:43:43