prikaz prve stranice dokumenta Slijedni alat za oblikovanje poluobujmica
  Download
PDF 2.56 MB
undergraduate thesis
Slijedni alat za oblikovanje poluobujmica
Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2016. urn:nbn:hr:235:269173
Sever, Karlo
University of Zagreb
Faculty of Mechanical Engineering and Naval Architecture

Institutional repository: Repository of Faculty of Mechanical Engineering and Naval Architecture University of Zagreb

Cite this document

Sever, K. (2016). Slijedni alat za oblikovanje poluobujmica (Undergraduate thesis). Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:235:269173

Sever, Karlo. "Slijedni alat za oblikovanje poluobujmica." Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2016. https://urn.nsk.hr/urn:nbn:hr:235:269173

Sever, Karlo. "Slijedni alat za oblikovanje poluobujmica." Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2016. https://urn.nsk.hr/urn:nbn:hr:235:269173

Sever, K. (2016). 'Slijedni alat za oblikovanje poluobujmica', Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, accessed 20 December 2024, https://urn.nsk.hr/urn:nbn:hr:235:269173

Sever K. Slijedni alat za oblikovanje poluobujmica [Undergraduate thesis]. Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture; 2016 [cited 2024 December 20] Available at: https://urn.nsk.hr/urn:nbn:hr:235:269173

K. Sever, "Slijedni alat za oblikovanje poluobujmica", Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Zagreb, 2016. Available at: https://urn.nsk.hr/urn:nbn:hr:235:269173

Metadata
TitleSlijedni alat za oblikovanje poluobujmica
Title (english)Progressive die in pipe strap forming
AuthorKarlo Sever
MentorZdenka Keran (mentor)
GranterUniversity of Zagreb
Faculty of Mechanical Engineering and Naval Architecture
Zagreb
Defense date and country2016-03-03, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
Tema ovog završnog rada je način djelovanja slijednog alata za izradu poluobujmica i proračun sila tijekom proizvodnog procesa. Opisani su svi procesi oblikovanja i svi dijelovi alata koji oblikuju željeni proizvod, u tehničkoj dokumentaciji prikazani su sklopovi pojedinih dijelova (segmenata), kao i konačan sklop, odnosno alat. Provedbom proračuna provjerio se i potvrdio odabir stroja kako bi se alat mogao koristiti bez smetnji. Uz to, objašnjen je pojam poluobujmica i odabir materijala ovisno o procesu izrade.
Abstract (english)
Subject of this paper is operation of progressive die in pipe strap forming and calculation of forces during the production process. All forming processes and all parts of die which form the product are described and assemblies of each part (segment) are shown in technical documentation, as well as final assembly, i.e. die. The choice of machine was checked and confirmed by calculating the forces which occur during the process of forming so that there are no faults during forming process. Besides that, term „half-strap“ is defined and the choice of material regarding the forming process is described.
Keywords
Languagecroatian
URN:NBNurn:nbn:hr:235:269173
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2019-05-22 15:47:15