prikaz prve stranice dokumenta Polimerni kompoziti za oplatu natjecateljskih motocikala
  Download
PDF 1.56 MB
undergraduate thesis
Polimerni kompoziti za oplatu natjecateljskih motocikala
Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2016. urn:nbn:hr:235:720490
Petruša, Jelena
University of Zagreb
Faculty of Mechanical Engineering and Naval Architecture

Institutional repository: Repository of Faculty of Mechanical Engineering and Naval Architecture University of Zagreb

Cite this document

Petruša, J. (2016). Polimerni kompoziti za oplatu natjecateljskih motocikala (Undergraduate thesis). Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:235:720490

Petruša, Jelena. "Polimerni kompoziti za oplatu natjecateljskih motocikala." Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2016. https://urn.nsk.hr/urn:nbn:hr:235:720490

Petruša, Jelena. "Polimerni kompoziti za oplatu natjecateljskih motocikala." Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2016. https://urn.nsk.hr/urn:nbn:hr:235:720490

Petruša, J. (2016). 'Polimerni kompoziti za oplatu natjecateljskih motocikala', Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, accessed 29 November 2024, https://urn.nsk.hr/urn:nbn:hr:235:720490

Petruša J. Polimerni kompoziti za oplatu natjecateljskih motocikala [Undergraduate thesis]. Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture; 2016 [cited 2024 November 29] Available at: https://urn.nsk.hr/urn:nbn:hr:235:720490

J. Petruša, "Polimerni kompoziti za oplatu natjecateljskih motocikala", Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Zagreb, 2016. Available at: https://urn.nsk.hr/urn:nbn:hr:235:720490

Metadata
TitlePolimerni kompoziti za oplatu natjecateljskih motocikala
Title (english)Polymer Composites in Racing Motorcycle Bodywork
AuthorJelena Petruša
MentorIrena Žmak (mentor)
GranterUniversity of Zagreb
Faculty of Mechanical Engineering and Naval Architecture
Zagreb
Defense date and country2016-03-02, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Basic Technical Sciences
Materials
Abstract
Kompozitni materijali danas predstavljaju najmodernije materijale kao alternativa konvencionalnim konstrukcijskim materijalima. Posjeduju iznimno dobra mehanička svojstva kao što su visoka specifična čvrstoća i specifična krutost. Iz tog razloga sve se više koriste u područjima sporta, pa se od njih izrađuju oplate natjecateljskih motocikala. Kriteriji koji se postavljaju na materijal oplate iznimno su visoki pa materijali koji se koriste moraju imati najbolja svojstva. U radu su opisani materijali i tehnologije korištene u proizvodnji dijelova oplate natjecateljskih motocikala. U eksperimentalnom dijelu rada izrađeni su ispitni uzorci polimernih kompozitnih materijala ojačanih različitim ojačanjima. Svrha ovog rada je upoznavanje tehnologija izrade suvremenih kompozitnih materijala i određivanje utjecaja različitih vrsta ojačanja na mehanička svojstava polimernih kompozita.
Abstract (english)
Composite materials represent the current state of the art materials which serve as an alternative to conventional construction materials. They have great mechanical properties such as the high tensile strength and specific stiffness. Therefore, their application in different sports is increasing. This is also true for motorcycle racing where most of the bodyworks are made out of composite materials. Requirement levels are set high so the materials in use need to have the best possible properties. In this thesis the materials and production techniques used in producing racing motorcycle bodyworks are presented. Within the experimental part of the thesis test samples reinforced with different kind s of reinforcement materials have been made. The purpose of the thesis is to study the composite materials production processes and to determine the influence of the applied reinforcement on the mechanical properties of the polymer composite materials.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:235:720490
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2019-05-22 16:13:26