prikaz prve stranice dokumenta Simulacija tlačnog lijevanja odljevka od Al legure
  Download
PDF 4.78 MB
master's thesis
Simulacija tlačnog lijevanja odljevka od Al legure
Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2016. urn:nbn:hr:235:545651
Tišljar, Krešimir
University of Zagreb
Faculty of Mechanical Engineering and Naval Architecture

Institutional repository: Repository of Faculty of Mechanical Engineering and Naval Architecture University of Zagreb

Cite this document

Tišljar, K. (2016). Simulacija tlačnog lijevanja odljevka od Al legure (Master's thesis). Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:235:545651

Tišljar, Krešimir. "Simulacija tlačnog lijevanja odljevka od Al legure." Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2016. https://urn.nsk.hr/urn:nbn:hr:235:545651

Tišljar, Krešimir. "Simulacija tlačnog lijevanja odljevka od Al legure." Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2016. https://urn.nsk.hr/urn:nbn:hr:235:545651

Tišljar, K. (2016). 'Simulacija tlačnog lijevanja odljevka od Al legure', Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, accessed 19 December 2024, https://urn.nsk.hr/urn:nbn:hr:235:545651

Tišljar K. Simulacija tlačnog lijevanja odljevka od Al legure [Master's thesis]. Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture; 2016 [cited 2024 December 19] Available at: https://urn.nsk.hr/urn:nbn:hr:235:545651

K. Tišljar, "Simulacija tlačnog lijevanja odljevka od Al legure", Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Zagreb, 2016. Available at: https://urn.nsk.hr/urn:nbn:hr:235:545651

Metadata
TitleSimulacija tlačnog lijevanja odljevka od Al legure
Title (english)Die casting simulation of Al alloy part
AuthorKrešimir Tišljar
MentorBranko Bauer (mentor)
GranterUniversity of Zagreb
Faculty of Mechanical Engineering and Naval Architecture
Zagreb
Defense date and country2016-07-14, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Production Mechanical Engineering
Abstract
U ovom radu opisana je tehnologija tlačnog lijeva. Opisane su izvedbe strojeva za tlačni lijev, materijali koji se primjenjuju te parametri kojima se utječe na tijek procesa i svojstva odljevka. Nadalje su opisani najčešći tipovi grešaka kod tlačnog lijeva. U eksperimentalnom dijelu rada za zadani odljevak konstruirane su dvije izvedbe uljevnog sustava za tlačni lijev: izvedba uljevnog sustava sa jednim ušćem te izvedba uljevnog sustava sa dva ušća. Za svaku izvedbu uljevnog sustava izrađene su dvije varijante sa različitim položajima preljeva te su provedene simulacije u programskom paketu QuikCAST 2014. Za obje izvedbe uljevnog sustava provedena je optimizacija gibanja tlačnog klipa kako bi se postigao željeni oblik vala i izbjeglo zarobljavanje zraka. Na posljetku je istražen utjecaj temperature predgrijavanja kokile na tijek punjenja i skrućivanje odljevka.
Abstract (english)
The subject of this thesis is high pressure die casting process. Types of machines used, the alloys used and parameters which affect the course of the process and quality of the casting are described. Furthermore, most common defects in high pressure die casting process are described. In the experimental part of the thesis, two versions of gating system are designed for a given casting: version with one gate and version with two gates. For each version two additional variations of gating system are designed, each with a different overflow placement, and simulation of the process carried out using the QuikCAST 2014 software. For both gating system versions, optimization of plunger movement during a slow shot is carried out in order to achieve the desired wave shape and avoid air entrainment. Lastly, an effect of die temperature on the filling of the die cavity and solidification of the casting is investigated.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:235:545651
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2019-05-22 17:02:41