prikaz prve stranice dokumenta Konstrukcijsko rješenje varijatora s remenom
  Download
PDF 3.45 MB
undergraduate thesis
Konstrukcijsko rješenje varijatora s remenom
Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2016. urn:nbn:hr:235:780323
Domović, Filip
University of Zagreb
Faculty of Mechanical Engineering and Naval Architecture

Institutional repository: Repository of Faculty of Mechanical Engineering and Naval Architecture University of Zagreb

Cite this document

Domović, F. (2016). Konstrukcijsko rješenje varijatora s remenom (Undergraduate thesis). Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:235:780323

Domović, Filip. "Konstrukcijsko rješenje varijatora s remenom." Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2016. https://urn.nsk.hr/urn:nbn:hr:235:780323

Domović, Filip. "Konstrukcijsko rješenje varijatora s remenom." Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2016. https://urn.nsk.hr/urn:nbn:hr:235:780323

Domović, F. (2016). 'Konstrukcijsko rješenje varijatora s remenom', Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, accessed 20 December 2024, https://urn.nsk.hr/urn:nbn:hr:235:780323

Domović F. Konstrukcijsko rješenje varijatora s remenom [Undergraduate thesis]. Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture; 2016 [cited 2024 December 20] Available at: https://urn.nsk.hr/urn:nbn:hr:235:780323

F. Domović, "Konstrukcijsko rješenje varijatora s remenom", Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Zagreb, 2016. Available at: https://urn.nsk.hr/urn:nbn:hr:235:780323

Metadata
TitleKonstrukcijsko rješenje varijatora s remenom
Title (english)Design solution of CVT with belt
AuthorFilip Domović
MentorIvica Galić (mentor)
GranterUniversity of Zagreb
Faculty of Mechanical Engineering and Naval Architecture
Zagreb
Defense date and country2016-09-22, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
General Mechanical Engineering (Construction)
Abstract
Cilj ovog završnog zadatka je dati kompletno konstrukcijsko rješenje varijatora s remenom. Ovakvim načinom prijenosa snage i momenta potrebno je osigurati kontinuiranu promjenu prijenosnog omjera u granicama od 0,33 do 3 što se ostvaruje istovremenim pomicanjem jednog dijela pogonske remenice te jednog dijela gonjene remenice ( pomični tanjuri remenica). Na početku su utvrđeni osnovni parametri ( snaga, momenti koji se prenose , osni razmak , promjeri remenica, duljina remena itd.). Zatim je provedeno dimenzioniranje i kontrolni proračuna dvaju vratila , te proračun ležajeva na kojima su ta vratila uležištena. Na posljetku dan je proračun mehanizma za promjenu prijenosnog omjera koji će funkcionirati na principu okretanja trapeznog vretena, te izbor elektromotora koji će davati tražene pogonske parametre. U zaključku se daje osvrt na cijeli zadatak. Unutar priloga se nalaze tehnička dokumentacija te konstrukcijsko rješenje prema zadanim parametrima.
Abstract (english)
The goal of this final paper is to carry out and give the design solution of CVT variator with belt. By that way of power and torque transsmition it is necessary to provide continuous change of speed ratio limited from 0,33 up to 3 which is achieved by simultaneously moving one part of the drive pulley and the one part of the driven pulley (movable sliding plates of pulleys). Housing of entire device is planned to be cast version. At the beginning some basic parameters were consolidated (power, torques which has to be transmitted, axial distances, diameters oft he pulleys, belt lenght, etc.). Then, the sizing and control of two shafts were carried out , and bearings on which shafts will be mounted were estimated. In the end is the calculaction of the mechanism for varying the transmission ratio ,which will operate on the principle of rotating the trapezoidal spindle, and the selection of electromotor which will provide the required drive parameters. In the conclusion is written as an overview of the whole subject. The attachment contains the neccesary technical documentation and the design solution according to the given parameters.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:235:780323
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2019-05-22 17:41:18