prikaz prve stranice dokumenta Stroj za automatsko sklapanje rekuperatora topline
  Download
PDF 3.78 MB
master's thesis
Stroj za automatsko sklapanje rekuperatora topline
Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2016. urn:nbn:hr:235:663652
Vidić, Tomislav
University of Zagreb
Faculty of Mechanical Engineering and Naval Architecture

Institutional repository: Repository of Faculty of Mechanical Engineering and Naval Architecture University of Zagreb

Cite this document

Vidić, T. (2016). Stroj za automatsko sklapanje rekuperatora topline (Master's thesis). Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:235:663652

Vidić, Tomislav. "Stroj za automatsko sklapanje rekuperatora topline." Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2016. https://urn.nsk.hr/urn:nbn:hr:235:663652

Vidić, Tomislav. "Stroj za automatsko sklapanje rekuperatora topline." Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2016. https://urn.nsk.hr/urn:nbn:hr:235:663652

Vidić, T. (2016). 'Stroj za automatsko sklapanje rekuperatora topline', Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, accessed 19 December 2024, https://urn.nsk.hr/urn:nbn:hr:235:663652

Vidić T. Stroj za automatsko sklapanje rekuperatora topline [Master's thesis]. Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture; 2016 [cited 2024 December 19] Available at: https://urn.nsk.hr/urn:nbn:hr:235:663652

T. Vidić, "Stroj za automatsko sklapanje rekuperatora topline", Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Zagreb, 2016. Available at: https://urn.nsk.hr/urn:nbn:hr:235:663652

Metadata
TitleStroj za automatsko sklapanje rekuperatora topline
Title (english)Machine for heat recovery device automatic assembling
AuthorTomislav Vidić
MentorMario Štorga (mentor)
GranterUniversity of Zagreb
Faculty of Mechanical Engineering and Naval Architecture
Zagreb
Defense date and country2016-12-09, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
General Mechanical Engineering (Construction)
Abstract
Tema rada je konstruiranje stroja za automatsko sklapanje rekuperatora topline. Materijal za izradu rekuperatora je polipropilenska ploča. Stroj je predviđen za sklapanje pločastog rekuperatora topline maksimalnih dimenzija 2050x2050x800 mm. Utvrđeno je da na tržištu stroj namijenjen za sklapanje rekuperatora tih dimenzija ne postoji. Pronađeni su uređaji koji mogu poslužiti kao parcijalna rješenja za pojedine sustave. Izradom definicije cilja za razvoj proizvoda, funkcijske dekompozicije i morfološke matrice postavljene su smjernice za konstruiranje stroja te ponuđena idejna rješenja u obliku koncepata. Stroj se sastoji od podsustava za dobavu materijala, podsustava za prihvat i pozicioniranje materijala, te podsustava za lijepljenje i potiskivanje ploča. Stroj je potpuno automatiziran i uz mogućnost sklapanja dva rekuperatora topline istovremeno znatno ubrzava proces proizvodnje. Vrednovanjem koncepata i tehno-ekonomskom analizom odabrano je projektno rješenje. Projektno rješenje je konstrukcijski razrađeno uporabom standardnih sklopova te uz proračun nestandardnih dijelova. Izrađen je 3D model stroja i potrebna tehnička dokumentacija.
Abstract (english)
The subject of the work is the design of the machine for heat recovery device automatic assembling. The material of the heat recovery unit is polypropylene plate. The device is designed for assembling plate heat recovery unit of maximum dimensions 2050x2050x800 mm. It was found that such machine for heat recovery unit assembling does not exist in the market. Devices that can be used as partial solutions for individual systems are found. By creating goals for product development, functional decomposition and morphological matrix, the guidelines for the design of the machine are settled and complete solutions in the form of concepts are offered. The device consists of a material supply system, the pick and place positioning system, automated adhesive system and plate suppression system. The machine is fully automated and with the possibility of assembling two heat recovery units at the same time, speeds up the production process. Through concept evaluation and techno-economic analysis, the final design of the machine is given. The design of the machine is made by using standard assemblies and calculations of non-standard parts. 3D CAD model of the machine is made with all necessary technical documentation.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:235:663652
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2019-05-22 18:13:13