prikaz prve stranice dokumenta Kontejnerska ispitna kabina za ispitivanje motora
  Download
PDF 3.27 MB
master's thesis
Kontejnerska ispitna kabina za ispitivanje motora
Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2017. urn:nbn:hr:235:752833
Halusek, Hrvoje
University of Zagreb
Faculty of Mechanical Engineering and Naval Architecture

Institutional repository: Repository of Faculty of Mechanical Engineering and Naval Architecture University of Zagreb

Cite this document

Halusek, H. (2017). Kontejnerska ispitna kabina za ispitivanje motora (Master's thesis). Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:235:752833

Halusek, Hrvoje. "Kontejnerska ispitna kabina za ispitivanje motora." Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2017. https://urn.nsk.hr/urn:nbn:hr:235:752833

Halusek, Hrvoje. "Kontejnerska ispitna kabina za ispitivanje motora." Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2017. https://urn.nsk.hr/urn:nbn:hr:235:752833

Halusek, H. (2017). 'Kontejnerska ispitna kabina za ispitivanje motora', Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, accessed 27 December 2024, https://urn.nsk.hr/urn:nbn:hr:235:752833

Halusek H. Kontejnerska ispitna kabina za ispitivanje motora [Master's thesis]. Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture; 2017 [cited 2024 December 27] Available at: https://urn.nsk.hr/urn:nbn:hr:235:752833

H. Halusek, "Kontejnerska ispitna kabina za ispitivanje motora", Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Zagreb, 2017. Available at: https://urn.nsk.hr/urn:nbn:hr:235:752833

Metadata
TitleKontejnerska ispitna kabina za ispitivanje motora
Title (english)Containerized test cell for IC engines
AuthorHrvoje Halusek
MentorZoran Lulić (mentor)
GranterUniversity of Zagreb
Faculty of Mechanical Engineering and Naval Architecture
Zagreb
Defense date and country2017-01-19, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Production Mechanical Engineering
Abstract
U okviru ovog diplomskog rada razmatrano je preseljenje postojeće hidrauličke kočnice SCHENCK D 400 – 1e za ispitivanje motora s unutarnjim izgaranjem iz postojeće kabine, koja se nalazi u Laboratoriju za motore i vozila, Fakulteta strojarstva i brodogradnje u novu zvučno izoliranu kabinu u kontejnerskoj izvedbi opremljenom odgovarajućom opremom. Smještaj ispitne kabine u kontejnerskog predviđen je u sjevernom dvorištu ispred zgrade Laboratorija za motore i vozila. Idejno rješenja ispitne kabine, koja je dimenzionirana prema vrsti odabrane kočnice za ispitivanje motora, uključuje razradu svih osnovnih elemenata koji omogućuju samostalno funkcioniranje sustava – konstruktivnog sustava, temeljne ploče, panela za zvučnu izolaciju kabine, sustava za hlađenje kočnice, ventilacijskog sustava te sustava napajanja električnom energijom. Za odabrano rješenje, izrađen je 3d model u programskom paketu SolidWorks te procjena troškova , koja može poslužiti za sve detaljnije razrade potencijalnog projekta ovakvog tipa.
Abstract (english)
Main subject of this thesis was possible relocation of the existing hydraulic brake SCHENCK D 400 - 1e intended for testing internal combustion engine from an existing test cell, which is curruntly located in the Laboratory for engines and vehicles, Faculty of Mechanical Engineering. It should be relocated in new soundproof container equipped with adequate performance equipment and situated in the northern courtyard in front of the Laboratory for engines and vehicles. Preliminary design of the test cell, which is dimensioned according to the selected type of brake for engine testing, includes the elaboration of the basic elements that enable independent functioning of the system - the structural system, the test bed, panels for sound insulation, brake cooling system, the ventilation system and the system of power energy. For the chosen solution, 3D model was made using SolidWorks software package. Also, the cost estimate was made, which can be used for more detailed design of the potential project of this type.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:235:752833
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2019-05-22 18:31:02