prikaz prve stranice dokumenta Primjena optičkog mjernog sustava za analizu šasije bolida Formula student
  Download
PDF 4.25 MB
undergraduate thesis
Primjena optičkog mjernog sustava za analizu šasije bolida Formula student
Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2017. urn:nbn:hr:235:254390
Horvat, Matej
University of Zagreb
Faculty of Mechanical Engineering and Naval Architecture

Institutional repository: Repository of Faculty of Mechanical Engineering and Naval Architecture University of Zagreb

Cite this document

Horvat, M. (2017). Primjena optičkog mjernog sustava za analizu šasije bolida Formula student (Undergraduate thesis). Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:235:254390

Horvat, Matej. "Primjena optičkog mjernog sustava za analizu šasije bolida Formula student." Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2017. https://urn.nsk.hr/urn:nbn:hr:235:254390

Horvat, Matej. "Primjena optičkog mjernog sustava za analizu šasije bolida Formula student." Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2017. https://urn.nsk.hr/urn:nbn:hr:235:254390

Horvat, M. (2017). 'Primjena optičkog mjernog sustava za analizu šasije bolida Formula student', Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, accessed 19 December 2024, https://urn.nsk.hr/urn:nbn:hr:235:254390

Horvat M. Primjena optičkog mjernog sustava za analizu šasije bolida Formula student [Undergraduate thesis]. Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture; 2017 [cited 2024 December 19] Available at: https://urn.nsk.hr/urn:nbn:hr:235:254390

M. Horvat, "Primjena optičkog mjernog sustava za analizu šasije bolida Formula student", Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Zagreb, 2017. Available at: https://urn.nsk.hr/urn:nbn:hr:235:254390

Metadata
TitlePrimjena optičkog mjernog sustava za analizu šasije bolida Formula student
Title (english)Application of optical measurement system in analysis of Formula student race car chassis
AuthorMatej Horvat
MentorGoran Šagi (mentor)
GranterUniversity of Zagreb
Faculty of Mechanical Engineering and Naval Architecture
Zagreb
Defense date and country2017-03-02, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
General Mechanical Engineering (Construction)
Abstract
U prvom dijelu završnog rada prikazan je teorijska podloga mjerenja metodom fotogrametrije, opisan je mjerni uređaj TRITOP tvrtke GOM mbH i sam postupak mjerenja pomoću mjernog uređaja TRITOP. Nakon uvodnog dijela o mjernoj metodi i opremi prikazano je probno mjerenje donjeg stražnjeg ramena bolida Strix u kojem je detaljnije opisan postupak mjerenja pomoću uređaja TRITOP na stvarnom objektu. Središnji dio zadatka je mjerenje cijele šasije bolida Strix, pri čemu je određena pozicija ključnih cijevi, prihvata ovjesa na lijevoj strani bolida, te je detaljno opisan postupak mjerenja i problematika koja se javlja tijekom mjerenja uređajem TRITOP na jednom složenijem objektu. Na kraju je prikazano mjerenje u postupku određivanja kinematičkih veličina kotača, a u ovom radu se opisuju kinematičke veličine koje se mijenjaju s promjenom položaja kotača i mjeri se promjena bočnog nagiba kotača u ovisnosti o vertikalnoj promjeni. U ovom dijelu mjerenja bilo je potrebno provesti na istom objektu nekoliko mjerenja s različitim položajem (vertikalnim) nosača kotača kako bi se dobilo odstupanje krivulja promjene kinemtičkih veličina u izmjerenom i simuliranom modelu.
Abstract (english)
In the first part of this thesis it is written about theoretical basis of measuring using photogrammetry, measuring device TRITOP manufactured by GOM mbH and measuring procedure by using TRITOP measurement device. After the introduction, which is about measuring method and equipment, it is written about test measure of rear lower A-arm with detailed description of using TRITOP measuring system on a real object. Main part of the thesis is measuring of the whole chassis of the car Strix where the positions of the important tubes and A-arm holders have been defined and it is also written in detail about using TRITOP to measure complicated objects and the problems associated with it. In the end, it is written about using TRITOP to determine sizes of the suspension kinematics, specifically on camber angle which changes with the vertical displacement of the wheel, including higher number of measurements of the same object in different vertical alignments. Also, a camber angle graph displacement curve of the simulated and measured model is presented.
Keywords
Languagecroatian
URN:NBNurn:nbn:hr:235:254390
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2019-05-22 18:39:06