prikaz prve stranice dokumenta Otpornost na trošenje korozijski postojanih čelika
  Download
PDF 4.06 MB
undergraduate thesis
Otpornost na trošenje korozijski postojanih čelika
Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2017. urn:nbn:hr:235:254883
Grubišić, Josip
University of Zagreb
Faculty of Mechanical Engineering and Naval Architecture

Institutional repository: Repository of Faculty of Mechanical Engineering and Naval Architecture University of Zagreb

Cite this document

Grubišić, J. (2017). Otpornost na trošenje korozijski postojanih čelika (Undergraduate thesis). Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:235:254883

Grubišić, Josip. "Otpornost na trošenje korozijski postojanih čelika." Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2017. https://urn.nsk.hr/urn:nbn:hr:235:254883

Grubišić, Josip. "Otpornost na trošenje korozijski postojanih čelika." Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2017. https://urn.nsk.hr/urn:nbn:hr:235:254883

Grubišić, J. (2017). 'Otpornost na trošenje korozijski postojanih čelika', Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, accessed 28 December 2024, https://urn.nsk.hr/urn:nbn:hr:235:254883

Grubišić J. Otpornost na trošenje korozijski postojanih čelika [Undergraduate thesis]. Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture; 2017 [cited 2024 December 28] Available at: https://urn.nsk.hr/urn:nbn:hr:235:254883

J. Grubišić, "Otpornost na trošenje korozijski postojanih čelika", Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Zagreb, 2017. Available at: https://urn.nsk.hr/urn:nbn:hr:235:254883

Metadata
TitleOtpornost na trošenje korozijski postojanih čelika
Title (english)Wear resistance of corrosion resistance steels
AuthorJosip Grubišić
MentorKrešimir Grilec (mentor)
GranterUniversity of Zagreb
Faculty of Mechanical Engineering and Naval Architecture
Zagreb
Defense date and country2017-03-03, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U ovome radu ispitivana je otpornost na abraziju i tvrdoću dva korozijski postojana čelika. Čelici koji su uspoređivani su AISI 304 (A2, X5CrNi18-10 ) i AISI 316 (A4, X5CrNiMo17-12-2). Abrazijsko trošenje ispitivalo se uz pomoću metode “suhi pijesak/ gumeni kotač“ (“dry sand/rubber wheel“). Dobiveni rezultati su prikazani tablično i grafički u nastavku. Tvrdoća je ispitivana na tvrdomjeru sa dijamantnom prizmom (Vickers metoda) uz pomoć utega od 200g dok je mikrostruktura poslikana svjetlosnim mikroskopom pri različitom povećanju.
Abstract (english)
In this paper abrasion wear and hardness of two corosion resistant steel aloys is compared. Compared steel aloys are AISI 304 (A2) and AISI 316 (A4). Metod for testing abrasion wear is (“dry sand/ rubber wheel“. Resaults are shown later in the paper. Hardness is evaluated with diamont indentor (Vickers method) and 200g weight, while microstructure has been evaluated with light microscope.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:235:254883
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2019-05-22 18:43:16