prikaz prve stranice dokumenta Primjena plinske mješavine He3H1 za robotizirano TIG zavarivanje Cr-Ni čelika
  Download
PDF 6.92 MB
undergraduate thesis
Primjena plinske mješavine He3H1 za robotizirano TIG zavarivanje Cr-Ni čelika
Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2017. urn:nbn:hr:235:729546
Šetinc, Marin
University of Zagreb
Faculty of Mechanical Engineering and Naval Architecture

Institutional repository: Repository of Faculty of Mechanical Engineering and Naval Architecture University of Zagreb

Cite this document

Šetinc, M. (2017). Primjena plinske mješavine He3H1 za robotizirano TIG zavarivanje Cr-Ni čelika (Undergraduate thesis). Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:235:729546

Šetinc, Marin. "Primjena plinske mješavine He3H1 za robotizirano TIG zavarivanje Cr-Ni čelika." Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2017. https://urn.nsk.hr/urn:nbn:hr:235:729546

Šetinc, Marin. "Primjena plinske mješavine He3H1 za robotizirano TIG zavarivanje Cr-Ni čelika." Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2017. https://urn.nsk.hr/urn:nbn:hr:235:729546

Šetinc, M. (2017). 'Primjena plinske mješavine He3H1 za robotizirano TIG zavarivanje Cr-Ni čelika', Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, accessed 22 November 2024, https://urn.nsk.hr/urn:nbn:hr:235:729546

Šetinc M. Primjena plinske mješavine He3H1 za robotizirano TIG zavarivanje Cr-Ni čelika [Undergraduate thesis]. Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture; 2017 [cited 2024 November 22] Available at: https://urn.nsk.hr/urn:nbn:hr:235:729546

M. Šetinc, "Primjena plinske mješavine He3H1 za robotizirano TIG zavarivanje Cr-Ni čelika", Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Zagreb, 2017. Available at: https://urn.nsk.hr/urn:nbn:hr:235:729546

Metadata
TitlePrimjena plinske mješavine He3H1 za robotizirano TIG zavarivanje Cr-Ni čelika
Title (english)Application of gas mixtures He3H1 in robotized TIG welding of Cr-Ni steel
AuthorMarin Šetinc
MentorIvica Garašić (mentor)
GranterUniversity of Zagreb
Faculty of Mechanical Engineering and Naval Architecture
Zagreb
Defense date and country2017-03-03, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U ovom radu ispitan je utjecaj zaštitnog plina na značajke zavarivanja austenitnih čelika. U teorijskom dijelu dani su osnovni podatci o TIG postupku zavarivanja, zavarljivosti visokolegiranih Cr-Ni čelika i stanicama za TIG zavarivanje. U eksperimentalnom dijelu rada provedeno je zavarivanje uzoraka TIG postupkom s dva različita zaštitna plina i s četiri različite brzine zavarivanja. Osnovni je materijal austenitni nehrđajući čelik oznake AISI 304 debljine 4 mm, a dodatni materijal nije korišten. Nakon zavarivanja pripremljeni su makroizbrusci na kojima je provedeno ispitivanje koje je korišteno za donošenje zaključaka o utjecaju zaštitnog plina na profil i površinski izgled navara.
Abstract (english)
This thesis describes the effect of the shielding gases on geometry and appearance of austenite stainless steels. The theoretical part gives some basic information about the TIG welding process, weldability of high Cr-Ni steel and stations for TIG welding. The experimental part is carried out with TIG welding process using two different shielding gases and four different welding speed. The basic material is austenite stainless steel AISI 304, 4 mm thick, and the filler material was not used. After welding macro specimens were prepared and tested and used to draw conclusions about the about the impact of the shielding gas on parameters TIG welds.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:235:729546
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2019-05-22 18:43:37