prikaz prve stranice dokumenta Biorazgradiva mrežica za dentalnu medicinu
  Download
PDF 2.77 MB
undergraduate thesis
Biorazgradiva mrežica za dentalnu medicinu
Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2017. urn:nbn:hr:235:429584
Babić, Bruno
University of Zagreb
Faculty of Mechanical Engineering and Naval Architecture

Institutional repository: Repository of Faculty of Mechanical Engineering and Naval Architecture University of Zagreb

Cite this document

Babić, B. (2017). Biorazgradiva mrežica za dentalnu medicinu (Undergraduate thesis). Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:235:429584

Babić, Bruno. "Biorazgradiva mrežica za dentalnu medicinu." Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2017. https://urn.nsk.hr/urn:nbn:hr:235:429584

Babić, Bruno. "Biorazgradiva mrežica za dentalnu medicinu." Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2017. https://urn.nsk.hr/urn:nbn:hr:235:429584

Babić, B. (2017). 'Biorazgradiva mrežica za dentalnu medicinu', Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, accessed 27 December 2024, https://urn.nsk.hr/urn:nbn:hr:235:429584

Babić B. Biorazgradiva mrežica za dentalnu medicinu [Undergraduate thesis]. Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture; 2017 [cited 2024 December 27] Available at: https://urn.nsk.hr/urn:nbn:hr:235:429584

B. Babić, "Biorazgradiva mrežica za dentalnu medicinu", Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Zagreb, 2017. Available at: https://urn.nsk.hr/urn:nbn:hr:235:429584

Metadata
TitleBiorazgradiva mrežica za dentalnu medicinu
Title (english)Biodegradable membrane for dental medicine
AuthorBruno Babić
MentorZdravko Schauperl (mentor)
GranterUniversity of Zagreb
Faculty of Mechanical Engineering and Naval Architecture
Zagreb
Defense date and country2017-03-03, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U ovome radu opisan je postupak razrade ideje s ciljem poboljšanja oralno kirurškog postupka augmentacije grebena. Do augmentacije grebena dolazi kada pacijent nema dovoljno svoje kosti kako bismo ugradili implantat. Sama augmentacija grebena je vrlo invazivan postupak za pacijenta. Augmentacija ima više metoda i verzija od kojih je bitno spomenuti, vođenu koštanu regeneraciju, sinus lift te onlay graft metodu. Onlay graft može biti sa i bez titanove mrežice. Oba postupka opisuje sekundarno otvaranje pacijenta nakon najmanje tri mjeseca, kada dođe do dovoljne stabilnosti praha potrebno je ukloniti vijke za osteosintezu te eventualno titanovu mrežicu. Ovaj rad je zamišljen na principu stvaranja individualne mrežice napravljene od bioragradivog polimera. Nakon razgradnje polimera ostaje augmentirana kost te je pacijent spreman za postavljanje implantata. Navedena individualizacija bila bi ostvarena preko CBCT snimaka pacijenta i korištenja CAD programa Catia. Mrežica bi imala i dva valjka sa unutarnje strane koji bi pružali dodatnu stabilnost djelujući kao oslonci. Ovoj razradi slijedi ispitivanje samog materijala nakon njegovog printanja koje nije obuhvaćeno u samom radu.
Abstract (english)
This paper describes the process of improving the oral surgical procedure of ridge augmentation. Augmentation of the ridge is necessary when the patient does not have enough of their bones needed to install the implant. Ridge augmentation is a very invasive procedure for the patient. There are various methods of ridge augmentation, some of the more important ones being guided bone regeneration, sinus lift and onlay graft method. The onlay graft can be done with or without a titanium mesh. In both cases the procedure refers to the secondary opening of the patient after a minimum recovery time of three months, after the stability of the powder is acomplished, it is necessary to remove the osteosythesis screws an possibly the titanium mesh. This paper is based on the principle of creating an individual mesh made of biodegradable polymer. What remains after the degradation of the polymer is the augmented bone and the patient is ready to receive the implant. The individualization would be achieved through the CBCT images of the patient and the CAD program CATIA. This mesh would also have two pins on the inside, which would provide additional stability by acting as support. This elaboration is followed by the testing of the materials after their 3D printing, which is not covered in the paper.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:235:429584
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2019-05-22 18:54:30