prikaz prve stranice dokumenta Karakterizacija tankih tvrdih prevlaka na bazi titanija
  Download
PDF 7.78 MB
master's thesis
Karakterizacija tankih tvrdih prevlaka na bazi titanija
Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2017. urn:nbn:hr:235:252468
Benjak, Mateja
University of Zagreb
Faculty of Mechanical Engineering and Naval Architecture

Institutional repository: Repository of Faculty of Mechanical Engineering and Naval Architecture University of Zagreb

Cite this document

Benjak, M. (2017). Karakterizacija tankih tvrdih prevlaka na bazi titanija (Master's thesis). Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:235:252468

Benjak, Mateja. "Karakterizacija tankih tvrdih prevlaka na bazi titanija." Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2017. https://urn.nsk.hr/urn:nbn:hr:235:252468

Benjak, Mateja. "Karakterizacija tankih tvrdih prevlaka na bazi titanija." Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2017. https://urn.nsk.hr/urn:nbn:hr:235:252468

Benjak, M. (2017). 'Karakterizacija tankih tvrdih prevlaka na bazi titanija', Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, accessed 11 August 2024, https://urn.nsk.hr/urn:nbn:hr:235:252468

Benjak M. Karakterizacija tankih tvrdih prevlaka na bazi titanija [Master's thesis]. Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture; 2017 [cited 2024 August 11] Available at: https://urn.nsk.hr/urn:nbn:hr:235:252468

M. Benjak, "Karakterizacija tankih tvrdih prevlaka na bazi titanija", Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Zagreb, 2017. Available at: https://urn.nsk.hr/urn:nbn:hr:235:252468

Metadata
TitleKarakterizacija tankih tvrdih prevlaka na bazi titanija
Title (english)Characterization of hard thin Ti-coatings
AuthorMateja Benjak
MentorSuzana Jakovljević (mentor)
GranterUniversity of Zagreb
Faculty of Mechanical Engineering and Naval Architecture
Zagreb
Defense date and country2017-07-20, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U ovom diplomskom radu, opisani su PVD (eng. Physical Vapour Deposition), CVD (eng. Chemical Vapour Deposition) te PACVD (eng. Plasma Assisted Chemical Vapour Deposition) postupci prevlačenja, te njihove prednosti, nedostaci i područja primjene. Postupci PVD i PACVD su i primijenjeni u radu. Prikazane su, kao i opisane, TiN, TiCN, te TiAlSiN prevlake, koje su se nanosile na alatni čelik za topli rad, X37CrMoV5-1, te na martenzitni nehrđajući čelik, X22CrMoV12-1. Nadalje, opisana je i provedena karakterizacija prevlaka na čelicima i to pomoću GDOES analize, EDS analize i pomoću skenirajućeg elektronskog mikroskopa. Utiskivanjem indentora prema normi VDI 3198 ispitana je prionjivost prevlake, dok je primjenom kalotesta i skenirajućeg elektronskog mikroskopa određena debljina prevlaka na pojedinim uzorcima. U konačnici opisana su i primijenjena elektrokemijska korozijska ispitivanja istosmjernom strujom te izmjeničnom strujom.
Abstract (english)
In this master thesis, coating processes of Physical Vapour Deposition (PVD), Chemical Vapour Deposition (CVD), and Plasma Assisted Chemical Vapour Deposition (PACVD) were described with the focus on advantages, disadvantages, and application areas. The PVD and PACVD procedures were applied in the practical part of the thesis. Description of TiN, TiCN and TiAlSiN coatings was also done. These coatings have been applied to the hot-working tool steel X37CrMoV5-1, and to the martensitic stainless steel X22CrMoV12-1. Furthermore, the characterization of steel coatings has been described and carried out using GDOES analysis, EDS analysis and scanning electron microscope. Coating adhesion was tested using indentation test according to VDI 3198 norm, while the calo test and scanning electron microscopy were used to determine the coating thickness of individual samples. Finally, electrochemical corrosion tests with direct and alternating current were also described and applied.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:235:252468
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2019-05-22 19:38:26