prikaz prve stranice dokumenta Nosač motke polubranika na pružnom prijelazu
  Download
PDF 6.51 MB
undergraduate thesis
Nosač motke polubranika na pružnom prijelazu
Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2017. urn:nbn:hr:235:287738
Štiglić, Anton
University of Zagreb
Faculty of Mechanical Engineering and Naval Architecture

Institutional repository: Repository of Faculty of Mechanical Engineering and Naval Architecture University of Zagreb

Cite this document

Štiglić, A. (2017). Nosač motke polubranika na pružnom prijelazu (Undergraduate thesis). Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:235:287738

Štiglić, Anton. "Nosač motke polubranika na pružnom prijelazu." Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2017. https://urn.nsk.hr/urn:nbn:hr:235:287738

Štiglić, Anton. "Nosač motke polubranika na pružnom prijelazu." Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2017. https://urn.nsk.hr/urn:nbn:hr:235:287738

Štiglić, A. (2017). 'Nosač motke polubranika na pružnom prijelazu', Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, accessed 06 September 2024, https://urn.nsk.hr/urn:nbn:hr:235:287738

Štiglić A. Nosač motke polubranika na pružnom prijelazu [Undergraduate thesis]. Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture; 2017 [cited 2024 September 06] Available at: https://urn.nsk.hr/urn:nbn:hr:235:287738

A. Štiglić, "Nosač motke polubranika na pružnom prijelazu", Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Zagreb, 2017. Available at: https://urn.nsk.hr/urn:nbn:hr:235:287738

Metadata
TitleNosač motke polubranika na pružnom prijelazu
Title (english)Pole mount on a half-barrier level crossing
AuthorAnton Štiglić
MentorDragan Žeželj (mentor)
GranterUniversity of Zagreb
Faculty of Mechanical Engineering and Naval Architecture
Zagreb
Defense date and country2017-09-28, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
Nosač motke polubranika je spojni dio između pogonskog vratila i motke koja sprječava prolazak vozilima u trenutku kada nailazi vlak preko pružnog prijelaza. Uobičajeno se motke polubranika izrađuje na duljinu do 7 m, a sve češće se javlja potreba i za duljinama i do 12 m. Kako bi se na nosač mogla spojiti motka dužine do 12 m potrebno je izraditi novo konstrukcijsko rješenje. U planiranje konstrukcijskog rješenja krenulo se ispitivanjem tržišta. Nakon ispitivanja slijedilo je generiranje koncepata te njihova usporedba, ocjenjivanje i odabir najpogodnijeg rješenja s kojim se krenulo u daljnju detaljniju konstrukcijsku razradu. U konstrukcijskoj razradi detaljno je prikazano da se sa odabranim rješenjem postižu svi zadani uvjeti u zadatku, te se provjerilo zadovoljavaju li zavari i profili postavljena opterećenja. Na kraju je prikazano gotovo rješenje.
Abstract (english)
Pole mount is a coupling between the drive shaft and the pole that prevents vehicle passage when it meets the train across the level crossing. Usually produced pole mount extends up to 7 m. Concerning there is more and more customer inquiry for pole mount that extends up to 12 m in length demands a new design solution in order to connect a pole up to 12 m long. Planning of the design solution started with market research. After the market research, the generation of concepts and their comparison, evaluation and selection of the most appropriate solution followed with further detailed design elaboration. In the design elaboration it is shown in detail that the selected solution achieves all the default requirements in the task, and it is checked whether the welds and profiles are properly dimensioned. In the end the final solution is presented.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:235:287738
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2019-05-22 20:07:27