prikaz prve stranice dokumenta Utjecaj konstrukcijskih značajki na mehanička svojstva 3D tiskane tvorevine
  Download
PDF 3.32 MB
master's thesis
Utjecaj konstrukcijskih značajki na mehanička svojstva 3D tiskane tvorevine
Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2017. urn:nbn:hr:235:296402
Mandić, Lea
University of Zagreb
Faculty of Mechanical Engineering and Naval Architecture

Institutional repository: Repository of Faculty of Mechanical Engineering and Naval Architecture University of Zagreb

Cite this document

Mandić, L. (2017). Utjecaj konstrukcijskih značajki na mehanička svojstva 3D tiskane tvorevine (Master's thesis). Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:235:296402

Mandić, Lea. "Utjecaj konstrukcijskih značajki na mehanička svojstva 3D tiskane tvorevine." Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2017. https://urn.nsk.hr/urn:nbn:hr:235:296402

Mandić, Lea. "Utjecaj konstrukcijskih značajki na mehanička svojstva 3D tiskane tvorevine." Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2017. https://urn.nsk.hr/urn:nbn:hr:235:296402

Mandić, L. (2017). 'Utjecaj konstrukcijskih značajki na mehanička svojstva 3D tiskane tvorevine', Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, accessed 19 December 2024, https://urn.nsk.hr/urn:nbn:hr:235:296402

Mandić L. Utjecaj konstrukcijskih značajki na mehanička svojstva 3D tiskane tvorevine [Master's thesis]. Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture; 2017 [cited 2024 December 19] Available at: https://urn.nsk.hr/urn:nbn:hr:235:296402

L. Mandić, "Utjecaj konstrukcijskih značajki na mehanička svojstva 3D tiskane tvorevine", Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Zagreb, 2017. Available at: https://urn.nsk.hr/urn:nbn:hr:235:296402

Metadata
TitleUtjecaj konstrukcijskih značajki na mehanička svojstva 3D tiskane tvorevine
Title (english)Influence of design characteristics on mechanical properties of 3D printed part
AuthorLea Mandić
MentorDamir Godec (mentor)
GranterUniversity of Zagreb
Faculty of Mechanical Engineering and Naval Architecture
Zagreb
Defense date and country2017-12-07, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Production Mechanical Engineering
Abstract
Aditivne tehnologije počele su se razvijati kako bi se zadovoljilo tržište. Neki od najvažnijih zahtjeva današnjeg tržišta su povišenje kvalitete proizvoda uz istodobno sniženje troškova, vremena razvoja i proizvodnje. Uz aditivnu tehnologiju razvili su se niskobudžetni 3D printeri koji rade na principu taložnog očvršćivanja. U ovome radu objašnjen je postupak taložnog očvršćivanja. Navedeni su prednosti i nedostaci primjene, te mogući problemi i rješenja prilikom izrade proizvoda tim postupkom. Poznavanje parametara izrade temelj je za izradu kvalitetnog proizvoda. Težište ovoga rada bilo je na parametrima ispune i konture, jer su ti parametri obrađivani u eksperimentalnom dijelu. Eksperimentalni dio rada sastojao se od izrade ispitnih tijela na KLONER3D printeru, a zatim je uslijedilo ispitivanje čvrstoće raznih kombinacija gustoće ispune i debljine konture. Kombinacije i broj stanja pokusa dobivene su centralno – kompozitnim planom pokusa pomoću programskog paketa DesignExpert.
Abstract (english)
Additive technologies began to develop with a reason of feeding the market. The most important market claims nowadays are raising the products quality with reducing costs, development and manufacturing time simultaneously. With the development of additive technology, low-budget 3D printers that work on principle of fused deposition modeling also evolved. This thesis explains the method of fused deposition modeling (FDM). Advantages, disadvantages and possible problems in the product development using this application are mentioned, and solutions are provided. Knowing the production parameters is the basis for making a high quality product. This thesis focus is on infill and contour parameters, because these parameters were processed in experimental part. The experimental thesis part consisted of making test pieces on the KLONER3D printer accompanied with a strength test of various combinations of infill density and contour thickness. Combinations and number of experiments were obtained by using a central - composite experiment plan of the DesignExpert program package.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:235:296402
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Embargo expiration date: 2019-11-29
Terms of useLicence In copyright icon
Created on2019-05-22 20:47:21