prikaz prve stranice dokumenta Prerada kompozita podtlačnim ulijevanjem
  Download
PDF 6.2 MB
master's thesis
Prerada kompozita podtlačnim ulijevanjem
Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2017. urn:nbn:hr:235:004591
Dika, Vladimir
University of Zagreb
Faculty of Mechanical Engineering and Naval Architecture

Institutional repository: Repository of Faculty of Mechanical Engineering and Naval Architecture University of Zagreb

Cite this document

Dika, V. (2017). Prerada kompozita podtlačnim ulijevanjem (Master's thesis). Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:235:004591

Dika, Vladimir. "Prerada kompozita podtlačnim ulijevanjem." Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2017. https://urn.nsk.hr/urn:nbn:hr:235:004591

Dika, Vladimir. "Prerada kompozita podtlačnim ulijevanjem." Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2017. https://urn.nsk.hr/urn:nbn:hr:235:004591

Dika, V. (2017). 'Prerada kompozita podtlačnim ulijevanjem', Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, accessed 22 December 2024, https://urn.nsk.hr/urn:nbn:hr:235:004591

Dika V. Prerada kompozita podtlačnim ulijevanjem [Master's thesis]. Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture; 2017 [cited 2024 December 22] Available at: https://urn.nsk.hr/urn:nbn:hr:235:004591

V. Dika, "Prerada kompozita podtlačnim ulijevanjem", Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Zagreb, 2017. Available at: https://urn.nsk.hr/urn:nbn:hr:235:004591

Metadata
TitlePrerada kompozita podtlačnim ulijevanjem
Title (english)Production of composite with resin infusion process
AuthorVladimir Dika
MentorAna Pilipović (mentor)
GranterUniversity of Zagreb
Faculty of Mechanical Engineering and Naval Architecture
Zagreb
Defense date and country2017-12-07, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U ovom radu dan je kratki pregled razvoja kompozitnih materijala s naglaskom na polimerne kompozitne materijale. Nadalje, definiran je pojam kompozitne tvorevine i dan je pregled nekih od najvažnijih kriterija podjele kompozita. Naglasak je stavljen na vlaknima ojačane polimerne kompozite, stoga su pobliže opisani materijali koji se primjenjuju pri njihovoj izradi. Dan je pregled materijala matrica, duromernih i plastomernih, te materijala za izradu ojačavala. Pobliže je opisan postupak podtlačnog ulijevanja s time da je ukazano na varijabilnosti koje ovaj postupak pruža. Također naglašeno je kako još uvijek nedostaju modeli i računalne simulacije koje bi obuhvatile sve te moguće varijacije postupka. Teoretski dio rada zaokružen je opisom postupaka završne obrade kalupljenih kompozitnih tvorevina. U eksperimentalnom dijelu rada izrađena je kompozitna ploča postupkom podtlačnog ulijevanja primjenjujući teoretska znanja opisana u prethodnim poglavljima. Greške koje su se pojavile na gotovom proizvodu popisane su i opisane kako bi se kod ponavljanja postupka mogle izbjeći.
Abstract (english)
This paper gives a brief overview of the development of composite materials with an emphasis on polymer composite materials. Furthermore, the concept of composite structure is defined and an overview of some of the most important composite division criteria is given. The emphasis is placed on fibre reinforced polymer composites, hence the materials used in their manufacture are more closely described. An overview of thermosetting and thermoplastic matrices and reinforcement materials is given. The resin infusion process is described in more detail with reference to its variability. It also emphasizes that models and computer simulations are still missing, encompassing all possible variations of the process. The theoretical part of the paper is rounded by a description of the finishing process of moulded composite structures. In the experimental part of the paper, the composite plate was made by the resin infusion process using the theoretical knowledge described in the previous chapters. The errors that appeared on the finished part were listed and described so that they could be avoided in the repetition of the process.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:235:004591
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Embargo expiration date: 2019-11-29
Terms of useLicence In copyright icon
Created on2019-05-22 20:50:55