prikaz prve stranice dokumenta Utjecaj nitriranja titanijeve legure Ti6Al4V na svojstva PACVD prevlake TiN
  Download
PDF 4.35 MB
undergraduate thesis
Utjecaj nitriranja titanijeve legure Ti6Al4V na svojstva PACVD prevlake TiN
Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2018. urn:nbn:hr:235:674813
Čulina, Romana
University of Zagreb
Faculty of Mechanical Engineering and Naval Architecture

Institutional repository: Repository of Faculty of Mechanical Engineering and Naval Architecture University of Zagreb

Cite this document

Čulina, R. (2018). Utjecaj nitriranja titanijeve legure Ti6Al4V na svojstva PACVD prevlake TiN (Undergraduate thesis). Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:235:674813

Čulina, Romana. "Utjecaj nitriranja titanijeve legure Ti6Al4V na svojstva PACVD prevlake TiN." Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2018. https://urn.nsk.hr/urn:nbn:hr:235:674813

Čulina, Romana. "Utjecaj nitriranja titanijeve legure Ti6Al4V na svojstva PACVD prevlake TiN." Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2018. https://urn.nsk.hr/urn:nbn:hr:235:674813

Čulina, R. (2018). 'Utjecaj nitriranja titanijeve legure Ti6Al4V na svojstva PACVD prevlake TiN', Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, accessed 26 November 2024, https://urn.nsk.hr/urn:nbn:hr:235:674813

Čulina R. Utjecaj nitriranja titanijeve legure Ti6Al4V na svojstva PACVD prevlake TiN [Undergraduate thesis]. Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture; 2018 [cited 2024 November 26] Available at: https://urn.nsk.hr/urn:nbn:hr:235:674813

R. Čulina, "Utjecaj nitriranja titanijeve legure Ti6Al4V na svojstva PACVD prevlake TiN", Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Zagreb, 2018. Available at: https://urn.nsk.hr/urn:nbn:hr:235:674813

Metadata
TitleUtjecaj nitriranja titanijeve legure Ti6Al4V na svojstva PACVD prevlake TiN
Title (english)The effect of Ti6Al4V titanium alloy nitriding on the proporties of PACVD coating TiCN
AuthorRomana Čulina
MentorDarko Landek (mentor)
GranterUniversity of Zagreb
Faculty of Mechanical Engineering and Naval Architecture
Zagreb
Defense date and country2018-03-01, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U radu je provedeno modificiranje i prevlačenje površine titanijeve legure Ti6Al4V postupcima: plazmatsko nitriranje, nitriranjem u solnoj kupci TENIFER i PACVD prevlačenjem prevlakom TiN. U eksperimentalnom dijelu rada su predložene radne temperature i postupci prevlačenja i modificiranja površina. Provedena je karakterizacija prevlake ispitivanjem hrapavosti površine te debljine, adhezivnost i mikrotvrdoća prevlake. Površine uzoraka snimljene su na svjetlosnom i skenirajućem elektronskom mikroskopu (SEM) te analizirane primjenom elektronske disperzijske spektroskopije (EDS). Iz EDS analize kemijskog sastava površine uzoraka nitriranih u solnoj kupci i plazmi nije utvrđena prisutnost dušika veća samo prisutnost kisika, što ukazuje da na površini uzoraka nije nastala zona spojeva veća samo oksidni film TiO2. Ispitivanje mikrotvrdoće površine utvrđena je viša tvrdoće nitriranih uzoraka u odnosu na polazno stanje, što ukazuje na nastanak vrlo tanke difuzijske zone uz površinu uzoraka.
Abstract (english)
This paper shows a research conducted on the modification and coating of titanium alloy surfaces Ti6Al4V using the following methods: plasma nitration, nitration in solvents TENIFER and PACVD TiN coating. The experiment was propounded with working temperatures and coating, as well as the surface modification procedures. While doing the coating characterization, surface roughness and thickness, adhesion, and microfiber coating were taken into consideration. Sample surfaces were recorded on a light and scanning electron microscope (SEM) and therefore analyzed using electronic dispersion spectroscopy (EDS). The outcome of the EDS analysis of the chemical composition of the surface of nitrated samples in the salt and plasma showed no evidence of nitrogen. However, there was evidence of oxygen, which indicates that the surface of the samples did not produce sole zone compounds, although it did produce the oxide film TiO2. Further investigation of the microhardness of the surface shows that the higher hardness of nitrated samples was found when comparing it to the initial state. This indicates the formation of a very thin diffusion zone along the surface of the given samples.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:235:674813
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2019-05-22 21:51:19