prikaz prve stranice dokumenta Simulacija rada jednocilindarskog motora bolida Formule Student uz primjenu turbopunjača
  Download
PDF 3.1 MB
undergraduate thesis
Simulacija rada jednocilindarskog motora bolida Formule Student uz primjenu turbopunjača
Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2018. urn:nbn:hr:235:680331
Zidarić, Marko
University of Zagreb
Faculty of Mechanical Engineering and Naval Architecture

Institutional repository: Repository of Faculty of Mechanical Engineering and Naval Architecture University of Zagreb

Cite this document

Zidarić, M. (2018). Simulacija rada jednocilindarskog motora bolida Formule Student uz primjenu turbopunjača (Undergraduate thesis). Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:235:680331

Zidarić, Marko. "Simulacija rada jednocilindarskog motora bolida Formule Student uz primjenu turbopunjača." Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2018. https://urn.nsk.hr/urn:nbn:hr:235:680331

Zidarić, Marko. "Simulacija rada jednocilindarskog motora bolida Formule Student uz primjenu turbopunjača." Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2018. https://urn.nsk.hr/urn:nbn:hr:235:680331

Zidarić, M. (2018). 'Simulacija rada jednocilindarskog motora bolida Formule Student uz primjenu turbopunjača', Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, accessed 20 December 2024, https://urn.nsk.hr/urn:nbn:hr:235:680331

Zidarić M. Simulacija rada jednocilindarskog motora bolida Formule Student uz primjenu turbopunjača [Undergraduate thesis]. Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture; 2018 [cited 2024 December 20] Available at: https://urn.nsk.hr/urn:nbn:hr:235:680331

M. Zidarić, "Simulacija rada jednocilindarskog motora bolida Formule Student uz primjenu turbopunjača", Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Zagreb, 2018. Available at: https://urn.nsk.hr/urn:nbn:hr:235:680331

Metadata
TitleSimulacija rada jednocilindarskog motora bolida Formule Student uz primjenu turbopunjača
Title (english)Simulation of performance of the single cylinder Formula Student car engine with turbocharger
AuthorMarko Zidarić
MentorDarko Kozarac (mentor)
GranterUniversity of Zagreb
Faculty of Mechanical Engineering and Naval Architecture
Zagreb
Defense date and country2018-02-28, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
Studenti Fakulteta Strojarstva i Brodogradnje u sklopu FSB Racing Team-a, već se godinama natječu na Formula Student natjecanjima. Formula Student je međunarodno natjecanje studenata tehničkih fakulteta u kojem studenti osmišljavaju, konstruiraju i izrađuju svoj trkaći bolid prema određenim pravila. Dosadašnji razvijeni bolidi FSB Racing Team-a nisu koristili turbopunjač, niti je ta mogućnost bila detaljno razrađena, iako je pravilnikom dopušten. S obzirom da pravilnik zahtjeva specifičan smještaj turbopunjača, pri čemu se kompresor turbopunjača mora nalaziti iza restriktora kojim se ograničuje najveći mogući protok zraka kroz motor, postavlja se pitanje da li bi njegova primjena donijela značajno poboljšanje momenta i snage motora. Također, važno je za napomenuti da je motor koji koristi bolid FSB Racing Team-a i u koji bi se ugrađivao turbopunjač jednocilindarski. U sklopu ovog rada napravljen je, u računalnom programu AVL Boost, simulacijski model postojećeg motora i simulacijski model istog tog motora s ugrađenim turbopunjačem. Kako bi se odabrao odgovarajući turbopunjač od dva ponuđena, motor je prethodno parametriziran uz primjenu pojednostavljenog modela turbopunjača. Međutim, pošto se nije moglo jednoznačno utvrditi koji je turbopunjač bolji za odabrani motor, provedene su simulacije za oba turbopunjača, te je prikazana usporedba rada motora bez prednabijanja i motora s različitim turbopunjačima.
Abstract (english)
Students of Faculty of Mechanical Engineering and Naval Architecture within the FSB Racing Team have been competing in Formula Student competitions for years. Formula Student is an international competition for students from faculities of technical studies in which students develop, design and construct their own racing car following certain rules. Formerly developed cars by FSB Racing Team have not been fitted with the turbocharger, nor has this possibility been elaborated in detail, although the rules permit usage of a turbocharger. Given that the rulebook requires a specific turbocharger's accommodation, such that the compressor must be behind the restrictor that limits the maximum possible airflow through the engine, the question arises as to whether its application would significantly improve engine's torque and power figures. Also, it is important to note that the engine used by the FSB Racing Team car and in which a turbocharger would be fitted, is a single-cylinder engine. In this thesis, a simulation model of the existing engine and a simulation model of the same engine fitted with a turbocharger were developed using AVL Boost software. In order to select between the two available turbochargers, the engines were parameterized with the use of a simplified turbocharger model. However, since the exact determination of better turbocharger for an engine of choice was not possible, simulations were carried out for both turbochargers and the comparison between normally aspirated engine and the engines with different turbochargers is given.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:235:680331
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2019-05-22 21:54:09