prikaz prve stranice dokumenta Naprava za centriranje streljiva na redeniku topa 20 mm
  Download
PDF 4.12 MB
undergraduate thesis
Naprava za centriranje streljiva na redeniku topa 20 mm
Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2018. urn:nbn:hr:235:706940
Puljić, Tajana
University of Zagreb
Faculty of Mechanical Engineering and Naval Architecture

Institutional repository: Repository of Faculty of Mechanical Engineering and Naval Architecture University of Zagreb

Cite this document

Puljić, T. (2018). Naprava za centriranje streljiva na redeniku topa 20 mm (Undergraduate thesis). Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:235:706940

Puljić, Tajana. "Naprava za centriranje streljiva na redeniku topa 20 mm." Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2018. https://urn.nsk.hr/urn:nbn:hr:235:706940

Puljić, Tajana. "Naprava za centriranje streljiva na redeniku topa 20 mm." Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2018. https://urn.nsk.hr/urn:nbn:hr:235:706940

Puljić, T. (2018). 'Naprava za centriranje streljiva na redeniku topa 20 mm', Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, accessed 18 January 2025, https://urn.nsk.hr/urn:nbn:hr:235:706940

Puljić T. Naprava za centriranje streljiva na redeniku topa 20 mm [Undergraduate thesis]. Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture; 2018 [cited 2025 January 18] Available at: https://urn.nsk.hr/urn:nbn:hr:235:706940

T. Puljić, "Naprava za centriranje streljiva na redeniku topa 20 mm", Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Zagreb, 2018. Available at: https://urn.nsk.hr/urn:nbn:hr:235:706940

Metadata
TitleNaprava za centriranje streljiva na redeniku topa 20 mm
Title (english)Design of device for centering of ammunition on 20 mm calibre cannon
AuthorTajana Puljić
MentorZoran Domitran (mentor)
GranterUniversity of Zagreb
Faculty of Mechanical Engineering and Naval Architecture
Zagreb
Defense date and country2018-02-28, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
Razvoj proizvoda, u okviru ovog rada, ne podrazumijeva razvoj kompletnog proizvoda kao cjeline, već nadogradnju dijela koji će se poboljšati cjelokupnu funkcionalnost uređaja. Prvi dio rada vodi kroz objašnjenje osnovnih principa rada uređaja i opis pojmova nužnih za razumijevanje problema definiranog neposredno nakon. Postavljanje zadatka sa jasnim smjernicama, omogućava prelazak u sljedeću fazu u kojoj su prikazani uređaji pronađeni na tržištu koji u potpunosti ili djelomično zadovoljavaju zahtjeve. Kao sljedeća točka u razvoju prikazana je funkcijska dekompozicija uređaja razložena na podfunkcije i njihove veze. Na njenom se temelju pronalaze tehnička rješenja za svaku pojedinu funkciju, te se izrađuje morfološka matrica. Ona daje širi pogled na sustav te olakšava pronalaženje novih rješenja u svrhu ostvarenja konačne funkcije proizvoda. Koncepti su zatim osmišljeni uz pomoć morfološke matrice, tj. kombinacijom njenih rješenja. Osmišljeno je šest funkcionalnih koncepata koji su se zatim evaluirali prema kriterijima koji su bitni za ispravan rad sustava. Prema dobivenim su se rezultatima odabrala rješenja za daljnji razvoj koji je uključivao i tehničku dokumentaciju tri različita rješenja. Sva su rješenja i konstrukcija svih dijelova izvedeni pomoću programskog paketa Siemens NX.
Abstract (english)
Product development, in the lines of this thesis, does not imply the development of a complete product, but an upgrade of a part which will improve the functionality of a whole product. The first past of the thesis will lead through the explanations of the basic work principles and description of the vital for the understanding of the problem defined immediately after. Setting up the task with clear guidelines enables the transit to the next phase which shows the devices on the market which completely or partially satisfy demands. As the next part of the process, functional analysis resolves the product in subfunctions and their relations. On that foundations solutions were found for every particular function, so morphological chart could be made. It gives a broader look on the system and eases the finding g of new solutions with the purpose of fulfilling the final product function. The concepts were designed with the help of the morphological chart, i.e. combining its solutions. Six functional concepts were designed and they were evaluated according to criterions substantial for the accurate running of the device. With the help of the results, different solutions were chosen for the further development which also included technical documentation of three different solutions. All of the solutions and design of the parts were conducted using software Siemens NX.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:235:706940
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Embargo expiration date: 2020-02-22
Terms of useLicence In copyright icon
Created on2019-05-22 21:56:15