prikaz prve stranice dokumenta Automatska montaža prijenosnog mehanizma protupožarne zaklopke
  Download
PDF 10.21 MB
undergraduate thesis
Automatska montaža prijenosnog mehanizma protupožarne zaklopke
Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2018. urn:nbn:hr:235:194164
Frkonja, Dina
University of Zagreb
Faculty of Mechanical Engineering and Naval Architecture

Institutional repository: Repository of Faculty of Mechanical Engineering and Naval Architecture University of Zagreb

Cite this document

Frkonja, D. (2018). Automatska montaža prijenosnog mehanizma protupožarne zaklopke (Undergraduate thesis). Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:235:194164

Frkonja, Dina. "Automatska montaža prijenosnog mehanizma protupožarne zaklopke." Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2018. https://urn.nsk.hr/urn:nbn:hr:235:194164

Frkonja, Dina. "Automatska montaža prijenosnog mehanizma protupožarne zaklopke." Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2018. https://urn.nsk.hr/urn:nbn:hr:235:194164

Frkonja, D. (2018). 'Automatska montaža prijenosnog mehanizma protupožarne zaklopke', Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, accessed 03 May 2024, https://urn.nsk.hr/urn:nbn:hr:235:194164

Frkonja D. Automatska montaža prijenosnog mehanizma protupožarne zaklopke [Undergraduate thesis]. Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture; 2018 [cited 2024 May 03] Available at: https://urn.nsk.hr/urn:nbn:hr:235:194164

D. Frkonja, "Automatska montaža prijenosnog mehanizma protupožarne zaklopke", Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Zagreb, 2018. Available at: https://urn.nsk.hr/urn:nbn:hr:235:194164

Metadata
TitleAutomatska montaža prijenosnog mehanizma protupožarne zaklopke
Title (english)Automatic assembly of a fire damper transmission mechanism
AuthorDina Frkonja
MentorBojan Jerbić (mentor)
GranterUniversity of Zagreb
Faculty of Mechanical Engineering and Naval Architecture
Zagreb
Defense date and country2018-03-01, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
Prijenosni mehanizam protupožarne zaklopke proizvod je tvrtke Klimaoprema d.d. S obzirom na to da je proizvod sklapan ručno, potrebno je osmisliti sustav za automatsku montažu. Proizvod je potrebno rastaviti na ugradbene elemente te svaki posebno analizirati. Temeljem analize dijelova dolazimo do saznanja o načinu sklapanja ugradbenih dijelova. Nakon proučenog načina sastavljanja ugradbenih dijelova određene su radne operacije kojima će se vršiti zadatak sklapanja. Prilikom projektiranja sustava bilo je važno održati omjer ekonomskih sredstava i potrebe za količinom proizvoda. Ponuđena su četiri moguća koncepta rješenja automatizacije montažnog procesa od kojih je jedan, prihvatljiv cijenom, detaljno razrađen. Odabrani su standardni elementi, odnosno uređaji sustava koji će izvršavati zadatak sklapanja. Za potrebe transporta ugradbenih dijelova tijekom vršenja radnih operacija, konstruiran je jedinstveni nosač proizvoda. U projektiranju sustava ostvareno je predviđeno vrijeme trajanja takta od željenih šezdeset sekundi. Osim same analize ugradbenih dijelova te odabira radnih operacija sklapanja i realizacije osmišljenog sustava u 3D okruženju, konstruirane su posebne hvataljke za svaki od pojedinih ugradbenih elemenata. Za svaku hvataljku napravljena je tehnička dokumentacija. Izvršena je simulacija sustava.
Abstract (english)
The flameproof transmission system is manufactured by Klimaoprema d.d. Since the product is assembled manually, nessesety was to design an automatic assembly system. The product should be dismantled on the mounting elements and separately analyzed. Based on the analysis of the mounting elements we come to find out the way of assembling the parts. After learned mode of assembling the mounting elements, working operations that will take the task of assembling are determined. When designing the system it was important to maintain the ratio of economic resources and the need for quantity of products. There are four possible concepts for automation of the assembly process for this assignment, one of them which is chosen as the best possible and with acceptable price, is described in detail. The standard elements that will perform the assignment task are selected. For the purpose of transporting the assembly parts during the performance of the work operations, a unique product carrier is constructed. This system design provides desired sixty seconds tact duration. Besides the analysis of the mounting parts and the selection of the workings of the assembly and realization of the designed system in the 3D environment, special grips for each of the individual embedded elements have been constructed. Technical documentation was made for each grip. System simulation was performed.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:235:194164
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Embargo expiration date: 2020-02-23
Terms of useLicence In copyright icon
Created on2019-05-22 22:11:07