prikaz prve stranice dokumenta Numerička analiza izlaznog vratila mjenjača
  Download
PDF 3.99 MB
master's thesis
Numerička analiza izlaznog vratila mjenjača
Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2018. urn:nbn:hr:235:426651
Grbac, Mate
University of Zagreb
Faculty of Mechanical Engineering and Naval Architecture

Institutional repository: Repository of Faculty of Mechanical Engineering and Naval Architecture University of Zagreb

Cite this document

Grbac, M. (2018). Numerička analiza izlaznog vratila mjenjača (Master's thesis). Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:235:426651

Grbac, Mate. "Numerička analiza izlaznog vratila mjenjača." Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2018. https://urn.nsk.hr/urn:nbn:hr:235:426651

Grbac, Mate. "Numerička analiza izlaznog vratila mjenjača." Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2018. https://urn.nsk.hr/urn:nbn:hr:235:426651

Grbac, M. (2018). 'Numerička analiza izlaznog vratila mjenjača', Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, accessed 10 September 2024, https://urn.nsk.hr/urn:nbn:hr:235:426651

Grbac M. Numerička analiza izlaznog vratila mjenjača [Master's thesis]. Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture; 2018 [cited 2024 September 10] Available at: https://urn.nsk.hr/urn:nbn:hr:235:426651

M. Grbac, "Numerička analiza izlaznog vratila mjenjača", Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Zagreb, 2018. Available at: https://urn.nsk.hr/urn:nbn:hr:235:426651

Metadata
TitleNumerička analiza izlaznog vratila mjenjača
Title (english)Numerical analysis of the gearbox output shaft
AuthorMate Grbac
MentorIvica Skozrit (mentor)
GranterUniversity of Zagreb
Faculty of Mechanical Engineering and Naval Architecture
Zagreb
Defense date and country2018-05-18, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
Tema rada je numerička analiza izlaznog vratila mjenjača brzina mopeda Tomos. Proračun mjenjača je obrađen kao tema Završnog rada te je ovaj rad nastavak Završnog rada. Uvodnim dijelom predstavljene su preinake napravljene u Završnom radu. Nakon uvoda ukratko je opisana metoda konačnih elemenata te korišteni konačni elementi za provedbu numeričkih analiza. Nakon uvoda prikazani su verifikacijski modeli pomoću kojih su odabrani odgovarajući konačni elementi. Rezultati numeričkih analiza jednostavnih primjera uspoređivani su s dobivenim rezultatima poznatih analitičkih izraza. Glavni dio rada obuhvaća numeričku analizu izlaznog vratila mjenjača u ovisnosti o kutu zakreta vratila. Kontrolirana su kritična mjesta vratila. Nakon provedenih analiza predložena je djelomična rekonstrukcija izlaznog vratila. Osim toga, prikazani su i prokomentirani rezultati numeričke analize nakon djelomične rekonstrukcije izlaznog vratila. Na kraju rada slijedi zaključak u kojem je zaokružena kompletna tema preinake mjenjača brzina mopeda Tomos.
Abstract (english)
The subject of this thesis is the numerical analysis of the output shaft of the gearbox of the Tomos moped. The calculation of the gearbox was a topic of Undergraduate thesis so this paper is a continuation to it. The Introductory section presents the modifications made as a part of Undergraduate thesis. After it, the finite element method was briefly described and final elements used for numerical analyzes. After the Introduction, the verification models are shown by which the corresponding finite elements was selected. Results of numerical analyzes of simple examples were compared with the results of known analytical expressions. The main part of this thesis involves the numerical analysis of the output shaft of the gearbox depending on the angle of the shaft rotation. Shafts critical points were controlled. After finished analyzes, a partial reconstruction of the output shaft was suggested. In addition, the results of the numerical analysis after partial reconstruction of the output shaft were also presented and commented. In the end of this thesis, there is the conclusion in which a completed whole of the adaptation of the gearbox of the Tomos moped was concluded.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:235:426651
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2019-05-22 22:22:02