prikaz prve stranice dokumenta Primjena višektiretijalnog optimiranja pri odabiru načina izrade zupčanika
  Download
PDF 4.14 MB
master's thesis
Primjena višektiretijalnog optimiranja pri odabiru načina izrade zupčanika
Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2018. urn:nbn:hr:235:678183
Margarin, Antonio
University of Zagreb
Faculty of Mechanical Engineering and Naval Architecture

Institutional repository: Repository of Faculty of Mechanical Engineering and Naval Architecture University of Zagreb

Cite this document

Margarin, A. (2018). Primjena višektiretijalnog optimiranja pri odabiru načina izrade zupčanika (Master's thesis). Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:235:678183

Margarin, Antonio. "Primjena višektiretijalnog optimiranja pri odabiru načina izrade zupčanika." Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2018. https://urn.nsk.hr/urn:nbn:hr:235:678183

Margarin, Antonio. "Primjena višektiretijalnog optimiranja pri odabiru načina izrade zupčanika." Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2018. https://urn.nsk.hr/urn:nbn:hr:235:678183

Margarin, A. (2018). 'Primjena višektiretijalnog optimiranja pri odabiru načina izrade zupčanika', Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, accessed 09 October 2024, https://urn.nsk.hr/urn:nbn:hr:235:678183

Margarin A. Primjena višektiretijalnog optimiranja pri odabiru načina izrade zupčanika [Master's thesis]. Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture; 2018 [cited 2024 October 09] Available at: https://urn.nsk.hr/urn:nbn:hr:235:678183

A. Margarin, "Primjena višektiretijalnog optimiranja pri odabiru načina izrade zupčanika", Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Zagreb, 2018. Available at: https://urn.nsk.hr/urn:nbn:hr:235:678183

Metadata
TitlePrimjena višektiretijalnog optimiranja pri odabiru načina izrade zupčanika
Title (english)Implementation of multicriterian optimization in process of gear production
AuthorAntonio Margarin
MentorPredrag Ćosić (mentor)
GranterUniversity of Zagreb
Faculty of Mechanical Engineering and Naval Architecture
Zagreb
Defense date and country2018-07-12, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
Unutar ovog diplomskog rada formirano je stablo kriterija koje, koristeći AHP metodu, ima za cilj odrediti tehnologiju izrade. AHP metoda provodi se unutar softvera Expert Choice, a kao alternative pojavljuju se konvencionalne i aditivne tehnologije. Proizvod za koji je vršen odabir varijante izrade zupčanik je složenog oblika. Na temelju podataka o vremenima izrade, troškovima izrade, te različitim karakteristikama proizvoda provedena je AHP metoda, analizirani su i komentirani dobiveni rezultati. Jednako tako, napravljena je i „what-if“ analiza kako bi se moglo promatrati što se događa s promjenom važnosti kriterija. Nadalje, kroz ovaj diplomski rad objašnjen je pojam reinženjeringa, pojam višekriterijalnog odlučivanja, objašnjena je AHP metoda te je dan kratki uvid u osnove rada softvera Expert Choice. Jednako tako, čitatelja se upoznaje s aditivnim tehnologijama, kronološki je prikazan njihov povijesni razvoj, istaknuti su najbitniji povijesni događaji vezani uz aditivnu proizvodnju te je dan popis postojećih postupaka aditivne proizvodnje.
Abstract (english)
In this graduate thesis the criteria tree which aims to determine the technology of production was formed. That tree was base for AHP method which was implemented throught software Expert Choice. Conventional and additive technologies was set as alternatives. The product which was the target of determination of technology of production was complex shaped gear. Based on datas of production time, production costs and various product characteristic, AHP method was performed, the results were analyzed and commented. Likewise, the „what-if“ analysis has been made so thah we can observe what is going on with if the importance of criteria was changed. Furthermore, the terms of reingeenering, multi-criteria decision making and AHP method has been explained. Special attention is dedicated to Expert Choice for which are given the basics of working. Also, the reader is introducted to additive techonoliges, their historical develompent is chronologically presented, the most important historical events related to additive production are highlighted and a list of existing additive production methods are presented.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:235:678183
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Embargo expiration date: 2020-07-03
Terms of useLicence In copyright icon
Created on2019-05-22 22:26:41