prikaz prve stranice dokumenta Utjecaj parametara injekcijskog prešanja na rasteznu čvrstoću linije spajanja pri preradi amorfnih i kristalastih plastomera
  Download
PDF 3.2 MB
master's thesis
Utjecaj parametara injekcijskog prešanja na rasteznu čvrstoću linije spajanja pri preradi amorfnih i kristalastih plastomera
Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2018. urn:nbn:hr:235:165411
Vadas, Iva
University of Zagreb
Faculty of Mechanical Engineering and Naval Architecture

Institutional repository: Repository of Faculty of Mechanical Engineering and Naval Architecture University of Zagreb

Cite this document

Vadas, I. (2018). Utjecaj parametara injekcijskog prešanja na rasteznu čvrstoću linije spajanja pri preradi amorfnih i kristalastih plastomera (Master's thesis). Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:235:165411

Vadas, Iva. "Utjecaj parametara injekcijskog prešanja na rasteznu čvrstoću linije spajanja pri preradi amorfnih i kristalastih plastomera." Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2018. https://urn.nsk.hr/urn:nbn:hr:235:165411

Vadas, Iva. "Utjecaj parametara injekcijskog prešanja na rasteznu čvrstoću linije spajanja pri preradi amorfnih i kristalastih plastomera." Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2018. https://urn.nsk.hr/urn:nbn:hr:235:165411

Vadas, I. (2018). 'Utjecaj parametara injekcijskog prešanja na rasteznu čvrstoću linije spajanja pri preradi amorfnih i kristalastih plastomera', Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, accessed 17 November 2024, https://urn.nsk.hr/urn:nbn:hr:235:165411

Vadas I. Utjecaj parametara injekcijskog prešanja na rasteznu čvrstoću linije spajanja pri preradi amorfnih i kristalastih plastomera [Master's thesis]. Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture; 2018 [cited 2024 November 17] Available at: https://urn.nsk.hr/urn:nbn:hr:235:165411

I. Vadas, "Utjecaj parametara injekcijskog prešanja na rasteznu čvrstoću linije spajanja pri preradi amorfnih i kristalastih plastomera", Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Zagreb, 2018. Available at: https://urn.nsk.hr/urn:nbn:hr:235:165411

Metadata
TitleUtjecaj parametara injekcijskog prešanja na rasteznu čvrstoću linije spajanja pri preradi amorfnih i kristalastih plastomera
Title (english)Influence of injection moulding parameters on welding line tensile strength in processsing of amorphous and crystalline thermoplastics
AuthorIva Vadas
MentorDamir Godec (mentor)
GranterUniversity of Zagreb
Faculty of Mechanical Engineering and Naval Architecture
Zagreb
Defense date and country2018-07-12, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U radu je teorijski opisano injekcijsko prešanje polimera i najvažniji parametri istog. Opisani su ISO kalupi, ISO ispitna tijela te postupci ispitivanja mehaničkih svojstava. U sklopu rada proveden je eksperimentalni dio, kojem je svrha bila ispitivanje utjecaja signifikantnih parametara injekcijskog prešanja na rasteznu čvrstoću linije spoja. Bilo je potrebno injekcijskim prešanjem preraditi jedan amorfni te jedan kristalni plastomer te istražiti postoje li i koje su razlike u njihovom ponašanju pri preradi injekcijskim prešanjem. Eksperiment je proveden na ubrizgavalici Battenfeld UNILOG 1000 za materijale polipropilen i polistiren.
Abstract (english)
In this paper the injection moulding of polymers and it's most important parameters are theoretically described. ISO moulds, ISO test pieces and some mechanical properties testing methods are described. As part of the paper, an experiment was conducted , in which the influence of the significant injection moulding parameters on the tensile strength of the weld line was tested. It was necessary to make one amorphous and one crystalline plastomer and to investigate wether there were any differences in their behavior in processing by injection moulding. The experiment was carried out on injection machine Battenfeld UNILOG1000 for polypropylene and for polystyrene.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:235:165411
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2019-05-22 22:38:14