prikaz prve stranice dokumenta Ovisnost rasteznih svojstava poliestera ojačanog staklenim vlaknima o tipu ispitnih tijela i smjeru opterećenja
  Download
PDF 2.3 MB
undergraduate thesis
Ovisnost rasteznih svojstava poliestera ojačanog staklenim vlaknima o tipu ispitnih tijela i smjeru opterećenja
Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2018. urn:nbn:hr:235:670273
Kužnar, Maks
University of Zagreb
Faculty of Mechanical Engineering and Naval Architecture

Institutional repository: Repository of Faculty of Mechanical Engineering and Naval Architecture University of Zagreb

Cite this document

Kužnar, M. (2018). Ovisnost rasteznih svojstava poliestera ojačanog staklenim vlaknima o tipu ispitnih tijela i smjeru opterećenja (Undergraduate thesis). Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:235:670273

Kužnar, Maks. "Ovisnost rasteznih svojstava poliestera ojačanog staklenim vlaknima o tipu ispitnih tijela i smjeru opterećenja." Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2018. https://urn.nsk.hr/urn:nbn:hr:235:670273

Kužnar, Maks. "Ovisnost rasteznih svojstava poliestera ojačanog staklenim vlaknima o tipu ispitnih tijela i smjeru opterećenja." Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2018. https://urn.nsk.hr/urn:nbn:hr:235:670273

Kužnar, M. (2018). 'Ovisnost rasteznih svojstava poliestera ojačanog staklenim vlaknima o tipu ispitnih tijela i smjeru opterećenja', Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, accessed 27 December 2024, https://urn.nsk.hr/urn:nbn:hr:235:670273

Kužnar M. Ovisnost rasteznih svojstava poliestera ojačanog staklenim vlaknima o tipu ispitnih tijela i smjeru opterećenja [Undergraduate thesis]. Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture; 2018 [cited 2024 December 27] Available at: https://urn.nsk.hr/urn:nbn:hr:235:670273

M. Kužnar, "Ovisnost rasteznih svojstava poliestera ojačanog staklenim vlaknima o tipu ispitnih tijela i smjeru opterećenja", Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Zagreb, 2018. Available at: https://urn.nsk.hr/urn:nbn:hr:235:670273

Metadata
TitleOvisnost rasteznih svojstava poliestera ojačanog staklenim vlaknima o tipu ispitnih tijela i smjeru opterećenja
Title (english)Effect of type and load direction of glass fibers reinforced polyester samples on tensile test results
AuthorMaks Kužnar
MentorTatjana Haramina (mentor)
GranterUniversity of Zagreb
Faculty of Mechanical Engineering and Naval Architecture
Zagreb
Defense date and country2018-09-27, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
Ispitana je ovisnost rasteznih svojstava nezasićenog poliestera ojačanog roving staklenim vlaknima o tipu ispitnih tijela i smjeru opterećenja. Svojstva ovih polimernih kompozita određena su u skladu s normom HRN EN ISO 527-4:2008. Uspoređena su dva tipa ispitnih uzoraka, tip 1 i tip 3, rezana u dva međusobno okomita smjera. Ova dva tipa imaju velike razlike u dimenzijama te je promatran utjecaj orijentacije i tipa ispitnih uzoraka na rezultate ispitivanja rastezne čvrstoće i na modul elastičnosti. Na temelju provedenog eksperimenta i statističke analize zaključeno je da orijentacija nema značajan utjecaj na svojstva, dok je velik utjecaj prihvata i dimenzija. Na temelju analize prihvaćeno je da tip 1 daje točniji rezultat, ali uz veće rasipanje. Stoga je potrebno raditi ispitivanja na većem broju ispitnih tijela.
Abstract (english)
The dependence of stretch properties of unsaturated polyester roving fiber reinforced composites on the type of test body and the load direction was studied. The properties of these polymeric composites were determined according to HRN EN ISO 527-4: 2008. Two types of test specimens, type 1 and type 3, were cut into two mutually perpendicular directions. These two types have large differences in dimensions and the influence of orientation and type of test specimens on the results of stretching test results and the modulus of elasticity was observed. Based on the experiment carried out and the statistical analysis it was concluded that the orientation does not have a significant effect on the properties, while the influence of acceptance and dimension is great. Based on the analysis, it was accepted that type 1 gave a more accurate result, but with greater dispersion. Therefore, testing on a large number of test bodies is required.
Keywords
Languagecroatian
URN:NBNurn:nbn:hr:235:670273
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2019-05-22 23:14:12