prikaz prve stranice dokumenta Trošenje alata za izvlačenje elipsi metalnog lima
  Download
PDF 2.66 MB
undergraduate thesis
Trošenje alata za izvlačenje elipsi metalnog lima
Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2018. urn:nbn:hr:235:668472
Antolković, Ivica
University of Zagreb
Faculty of Mechanical Engineering and Naval Architecture

Institutional repository: Repository of Faculty of Mechanical Engineering and Naval Architecture University of Zagreb

Cite this document

Antolković, I. (2018). Trošenje alata za izvlačenje elipsi metalnog lima (Undergraduate thesis). Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:235:668472

Antolković, Ivica. "Trošenje alata za izvlačenje elipsi metalnog lima." Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2018. https://urn.nsk.hr/urn:nbn:hr:235:668472

Antolković, Ivica. "Trošenje alata za izvlačenje elipsi metalnog lima." Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2018. https://urn.nsk.hr/urn:nbn:hr:235:668472

Antolković, I. (2018). 'Trošenje alata za izvlačenje elipsi metalnog lima', Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, accessed 11 August 2024, https://urn.nsk.hr/urn:nbn:hr:235:668472

Antolković I. Trošenje alata za izvlačenje elipsi metalnog lima [Undergraduate thesis]. Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture; 2018 [cited 2024 August 11] Available at: https://urn.nsk.hr/urn:nbn:hr:235:668472

I. Antolković, "Trošenje alata za izvlačenje elipsi metalnog lima", Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Zagreb, 2018. Available at: https://urn.nsk.hr/urn:nbn:hr:235:668472

Metadata
TitleTrošenje alata za izvlačenje elipsi metalnog lima
Title (english)Wear of tools for drawing elipsis on metal sheets
AuthorIvica Antolković
MentorSuzana Jakovljević (mentor)
GranterUniversity of Zagreb
Faculty of Mechanical Engineering and Naval Architecture
Zagreb
Defense date and country2018-09-27, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U ovom radu navedeni su materijali koji se koriste za izradu alata za izvlačenje metalnog lima. Objašnjena je primijenjena toplinska obrada cementiranja alata koja je potrebna zbog posebnih zahtjeva na svojstva materijala alata. Također su navedeni i objašnjeni procesi i mehanizmi trošenja do kojih dolazi zbog udarnog rada alata. U eksperimentalnom dijelu rada provedena su ispitivanja tvrdoće materijala i analiza mikrostrukture te je na temelju dobivenih rezultata donesen zaključak.
Abstract (english)
This paper deals with materials used for drawing sheet metals. Heat treatments required due to specific required mechanical properties, are explained. Wear mechanisms caused by impact tooling are listed and explained. Experimental part consists of hardness testing and microstructural analysis, and obtained results were used to develop a conclusion.
Keywords
Languagecroatian
URN:NBNurn:nbn:hr:235:668472
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2019-05-22 23:14:36