prikaz prve stranice dokumenta Utjecaj zaštitnog plina pri TIG zavarivanju titana
  Download
PDF 3.84 MB
master's thesis
Utjecaj zaštitnog plina pri TIG zavarivanju titana
Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2018. urn:nbn:hr:235:298612
Vukoja, Matija
University of Zagreb
Faculty of Mechanical Engineering and Naval Architecture

Institutional repository: Repository of Faculty of Mechanical Engineering and Naval Architecture University of Zagreb

Cite this document

Vukoja, M. (2018). Utjecaj zaštitnog plina pri TIG zavarivanju titana (Master's thesis). Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:235:298612

Vukoja, Matija. "Utjecaj zaštitnog plina pri TIG zavarivanju titana." Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2018. https://urn.nsk.hr/urn:nbn:hr:235:298612

Vukoja, Matija. "Utjecaj zaštitnog plina pri TIG zavarivanju titana." Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2018. https://urn.nsk.hr/urn:nbn:hr:235:298612

Vukoja, M. (2018). 'Utjecaj zaštitnog plina pri TIG zavarivanju titana', Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, accessed 17 June 2024, https://urn.nsk.hr/urn:nbn:hr:235:298612

Vukoja M. Utjecaj zaštitnog plina pri TIG zavarivanju titana [Master's thesis]. Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture; 2018 [cited 2024 June 17] Available at: https://urn.nsk.hr/urn:nbn:hr:235:298612

M. Vukoja, "Utjecaj zaštitnog plina pri TIG zavarivanju titana", Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Zagreb, 2018. Available at: https://urn.nsk.hr/urn:nbn:hr:235:298612

Metadata
TitleUtjecaj zaštitnog plina pri TIG zavarivanju titana
Title (english)Influence of shielding gas at TIG welding of titanium
AuthorMatija Vukoja
MentorIvica Garašić (mentor)
GranterUniversity of Zagreb
Faculty of Mechanical Engineering and Naval Architecture
Zagreb
Defense date and country2018-12-06, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
Cilj ovog diplomskog rada je odrediti utjecaj brzine zavarivanja i mješavine zaštitnog plina kod TIG zavarivanja titanija na dubinu penetracije. U teorijskom dijelu rada iznesene su karakteristike titanija i njegovih legura kao karakteristike pojedinih postupaka kojima se uobičajeno zavaruje navedeni materijal. Detaljnije je analiziran TIG postupak te detalji vezani uz njega kao korišteni dodatni materijal, plinske mješavine, specifičnosti pri zavarivanju titanija ovim postupkom te uobičajeni parametri rada. U eksperimentalnom dijelu rada u laboratoriju su rađeni navari mehaniziranim TIG postupkom na uzorcima titanija pri čemu su korištene dvije mješavine zaštitnog plina te dvije različite brzine zavarivanja kako bi se utvrdio njihov utjecaj na dubinu penetracije. Nakon izvedenog navarivanja analizirana je profil zavara te je izmjerena dubina penetracije. Na osnovu izmjerenih vrijednosti doneseni su zaključci o utjecaju mješavine zaštitnog plina kao i brzine zavarivanja na dubinu penetracije za TIG postupak zavarivanja titanija.
Abstract (english)
The aim of this master's thesis is to determine the influence of welding speed and shielding gas mixture on the depth of penetration for TIG welding of titanium. The characteristics of titanium and it's alloys along with the characteristics of welding procedures usually used for joining them are examined in the theoretical part. The TIG process is further analyzed along with the details regarding filler materials, gas mixtures and specificities are examined regarding welding titanium with this procedures along with the typical welding parameters. The experimental research was done in the laboratory and it included a mechanized TIG process used to make beads while two different shielding gas mixtures and welding speeds were used to determine their influence on the depth of penetration. After the welding procedure was done, the weld profile was analyzed and the depth of penetration was measured. Based on the measurements obtained conclusions were made on the influence of the shielding gas and welding speed on the depth of penetration for TIG welding of titanium.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:235:298612
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2019-05-22 23:33:10