prikaz prve stranice dokumenta Prijenosna jedinica za pogon plutajuće pumpe
  Download
PDF 10.14 MB
master's thesis
Prijenosna jedinica za pogon plutajuće pumpe
Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2018. urn:nbn:hr:235:216191
Iličić, Ivan
University of Zagreb
Faculty of Mechanical Engineering and Naval Architecture

Institutional repository: Repository of Faculty of Mechanical Engineering and Naval Architecture University of Zagreb

Cite this document

Iličić, I. (2018). Prijenosna jedinica za pogon plutajuće pumpe (Master's thesis). Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:235:216191

Iličić, Ivan. "Prijenosna jedinica za pogon plutajuće pumpe." Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2018. https://urn.nsk.hr/urn:nbn:hr:235:216191

Iličić, Ivan. "Prijenosna jedinica za pogon plutajuće pumpe." Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2018. https://urn.nsk.hr/urn:nbn:hr:235:216191

Iličić, I. (2018). 'Prijenosna jedinica za pogon plutajuće pumpe', Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, accessed 17 November 2024, https://urn.nsk.hr/urn:nbn:hr:235:216191

Iličić I. Prijenosna jedinica za pogon plutajuće pumpe [Master's thesis]. Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture; 2018 [cited 2024 November 17] Available at: https://urn.nsk.hr/urn:nbn:hr:235:216191

I. Iličić, "Prijenosna jedinica za pogon plutajuće pumpe", Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Zagreb, 2018. Available at: https://urn.nsk.hr/urn:nbn:hr:235:216191

Metadata
TitlePrijenosna jedinica za pogon plutajuće pumpe
Title (english)Movable unit for drive floating pump
AuthorIvan Iličić
MentorMilan Kostelac (mentor)
GranterUniversity of Zagreb
Faculty of Mechanical Engineering and Naval Architecture
Zagreb
Defense date and country2018-12-07, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
General Mechanical Engineering (Construction)
Abstract
U ovom diplomskom radu prikazana je izrada konstrukcijskog rješenja prijenosne jedinice za pogon plutajućih pumpi. U sklopu rada napravljena je konstrukcijska razrada prijenosne jedinice za pogon plutajućih pumpi pomoću hidrostatičkih prijenosnika pogonjenih motorom s unutrašnjim izgaranjem. Kroz rad proračunati su dijelovi hidrauličnog sustava poput spremnika i hladnjaka hidrauličnog ulja, zatim je razrađena nosiva konstrukcija prijenosne jedinice te provjereni svi kritični presjeci konstrukcije. Napravljena je i konstrukcijska razrada i proračun udvojenog hidrauličnog vitla za namatanje šezdeset metara hidrauličnog crijeva tlačnog voda, te šezdeset metara hidrauličnog crijeva povratnog voda. Crijeva su namjenjena za dobavu hidrauličnog ulja od prijenosne jedinice do pogonskog hidromotora plutajuće pumpe. Na kraju su prikazani standardni dijelovi korišteni pri razradi prijenosne jedinice, te je napravljena analiza svih mogućih opasnosti pri radi s prijenosnom jedinicom prema Pravilniku o sigurnosti strojeva. Prijenosna jedinica je oblikovana i konstruirana uz pomoć standardnih profila spojenih lako dostupnim tehnikama spajanja. Proveden je kontrolni proračun te je za prikaz rješenja jedinice izrađen 3D CAD model napravljen u programskom paketu PTC Creo 2.0®. Na osnovu spomenutog modela izrađena je tehnička dokumentacija jedinice.
Abstract (english)
In this master thesis is shown a design process of a floating pump movable drive unit. In this thesis is shown a design process of a floating pump movable drive unit by means of hydrostatic drive system powered by an internal combustion engine. Throughout the thesis, the parts of the hydraulic system such as the tank and cooler of the hydraulic oil have been calculated, then the main carrier construction is designed and all critical cross sections of the construction are checked. The strucural design and calculation of the double drum hydraulic winch for winding the sixty meter of hydraulic pressure line hose and the sixty meter hydraulic return hose is also made. The hoses are intended for the supply of hydraulic oil from the movable unit to the hydraulic drive motor of floating pump. At the end, the standard parts used in the development of the movable unit and an analysis of all possible hazards while working with the movable unit according to the Machinery Safety Ordinance are shown. The movable unit is designed and shaped with the help of standard profiles connected with easily accessible connecting techniques. A calculation was performed and a 3D CAD model made in the PTC Creo 2.0® software was displayed to show the solution. Based on the mentioned model, the technical documentation of the unit was made.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:235:216191
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2019-05-22 23:33:54