prikaz prve stranice dokumenta Idejno rješenje optimizacije broja faza kod štancanja
  Download
PDF 4.64 MB
undergraduate thesis
Idejno rješenje optimizacije broja faza kod štancanja
Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2019. urn:nbn:hr:235:733639
Biškup, Davor
University of Zagreb
Faculty of Mechanical Engineering and Naval Architecture

Institutional repository: Repository of Faculty of Mechanical Engineering and Naval Architecture University of Zagreb

Cite this document

Biškup, D. (2019). Idejno rješenje optimizacije broja faza kod štancanja (Undergraduate thesis). Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:235:733639

Biškup, Davor. "Idejno rješenje optimizacije broja faza kod štancanja." Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2019. https://urn.nsk.hr/urn:nbn:hr:235:733639

Biškup, Davor. "Idejno rješenje optimizacije broja faza kod štancanja." Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2019. https://urn.nsk.hr/urn:nbn:hr:235:733639

Biškup, D. (2019). 'Idejno rješenje optimizacije broja faza kod štancanja', Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, accessed 20 December 2024, https://urn.nsk.hr/urn:nbn:hr:235:733639

Biškup D. Idejno rješenje optimizacije broja faza kod štancanja [Undergraduate thesis]. Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture; 2019 [cited 2024 December 20] Available at: https://urn.nsk.hr/urn:nbn:hr:235:733639

D. Biškup, "Idejno rješenje optimizacije broja faza kod štancanja", Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Zagreb, 2019. Available at: https://urn.nsk.hr/urn:nbn:hr:235:733639

Metadata
TitleIdejno rješenje optimizacije broja faza kod štancanja
Title (english)Conceptual solution for optimizing the number of phases in die cutting
AuthorDavor Biškup
MentorZdenka Keran (mentor)
GranterUniversity of Zagreb
Faculty of Mechanical Engineering and Naval Architecture
Zagreb
Defense date and country2019-02-28, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
Tema ovog završnog rada je provedba analize i optimizacije broja faza kod štancanja prilagodbom, tj. zamjenom dva alata jednim. Na temelju dodatne literature proučeni su i opisani svi procesi štancanja. Načinjene su određene podjele prema načinu štancanja, prema alatu za štancanje te prema alatnim strojevima na kojima se provodi sam proces štancanja. Ukratko su dani materijali koji se koriste u procesu kao i materijali od kojih su načinjeni alati i strojevi za štancanje. Izmjerene su potrebne veličine u poduzeću, u proizvodnom pogonu, na samom alatnom stroju. Te veličine, kao što je npr. vrijeme, kasnije ulaze u proračun na osnovi kojih se na kraju radi usporedba korištenja alata. Na temelju dane usporedbe donosi se argumentirani zaključak, potkrijepljen dokazima, koji će bitno utjecati na buduće radnje u proizvodnom procesu.
Abstract (english)
The subject of this final work is implementation of analysis and optimization number of stages in punching by adaption, i.e. replacing two tools with one. Based on additional literature, all processes were studied and described. Classification is made according to method of stamping, stamping tool and machine tools. There are shortly given some materials that are in this process used, as well as the materials from which are tools and machines made. There were required sizes in the company, in production facility, on machine measured. These sizes, such as time, are later in budget used. Then, specified comparison is made. Based on the comparison, an arguable conclusion is provided, which is by evidence substantiated. Finally, this will have effect on the work in the production process in future.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:235:733639
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2019-05-22 23:52:44