prikaz prve stranice dokumenta Naprava za stezanje kutijastih obradaka
  Download
PDF 3.11 MB
undergraduate thesis
Naprava za stezanje kutijastih obradaka
Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2019. urn:nbn:hr:235:299657
Martinović, Antun
University of Zagreb
Faculty of Mechanical Engineering and Naval Architecture

Institutional repository: Repository of Faculty of Mechanical Engineering and Naval Architecture University of Zagreb

Cite this document

Martinović, A. (2019). Naprava za stezanje kutijastih obradaka (Undergraduate thesis). Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:235:299657

Martinović, Antun. "Naprava za stezanje kutijastih obradaka." Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2019. https://urn.nsk.hr/urn:nbn:hr:235:299657

Martinović, Antun. "Naprava za stezanje kutijastih obradaka." Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2019. https://urn.nsk.hr/urn:nbn:hr:235:299657

Martinović, A. (2019). 'Naprava za stezanje kutijastih obradaka', Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, accessed 20 December 2024, https://urn.nsk.hr/urn:nbn:hr:235:299657

Martinović A. Naprava za stezanje kutijastih obradaka [Undergraduate thesis]. Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture; 2019 [cited 2024 December 20] Available at: https://urn.nsk.hr/urn:nbn:hr:235:299657

A. Martinović, "Naprava za stezanje kutijastih obradaka", Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Zagreb, 2019. Available at: https://urn.nsk.hr/urn:nbn:hr:235:299657

Metadata
TitleNaprava za stezanje kutijastih obradaka
Title (english)Clamping device for box-shape workpieces
AuthorAntun Martinović
MentorDamir Ciglar (mentor)
GranterUniversity of Zagreb
Faculty of Mechanical Engineering and Naval Architecture
Zagreb
Defense date and country2019-02-28, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
Proizvodnja konstantno prati čovječanstvo, te ljudi kroz povijest, od drevnog Egipta sve do danas, teže što jednostavnijem obavljanju zadataka i poslova s kojima se suočavaju. To se postiže suvremenom proizvodnjom novih sustava koji uključuju razvoj novih numerički upravljanih alatnih strojeva, reznih alata i naprava. U uvodnom djelu završnog rada predstavlja se utjecaj tehnologije na proizvodnju. Nakon uvoda, dan je prikaz naprava, njihova podjela, osnovne značajke i neke od mogućih izvedbi. Unatoč mnogim izvedbama, baza završnog rada biti će na napravama za stezanje kutijastih dijelova. Nadalje, u programu SOLIDWORKS 2018 je projektirana naprava za stezanje izradaka. U završnom radu biti će opisani postupci izrade dijelova naprave za stezanje od sirovca do gotovog proizvoda. Izrada je potkrijepljena proračunom sile u vijku, proračunom tlakova pojedinih dijelova naprave za stezanje, kao i proračunom krutosti. Također je izrađena sklopna i radionička dokumentacija za izradu nestandardnih dijelova.
Abstract (english)
Manufacturing has always followed mankind. Throughout history, from ancient Egipt until today, humans have been striving to simplify tasks which they need to perform. This is accomplished by modern manufacturing of new systems, which includes development of numerically controlled machines, cutting tools and clamping devices. In the preface of this paper there is an introduction to the influence of technology in manufacturing. After the introduction, there is a brief overview of clamping devices, their classification, basic features and possible construction. Despite of many possible ways of construction, the focus of this paper will be on clamping devices which are used for clamping box- shape pieces. The paper includes the design of the clamping device conducted in SOLIDWORKS 2018 along with the description of the manufacturing process, from the beginning workpiece to the final product. Furthermore, the design has been backed up by analytical analysis of screw force, stress and stiffness on specific parts of the clamping device. Part and assembly documentation for non standard parts has also been added.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:235:299657
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2019-05-23 00:19:17