prikaz prve stranice dokumenta Ispitivanje otpornosti na abrazijsko trošenje TiN/TiCN prevlaka na visokolegiranim alatnim čelicima za hladni rad
  Download
PDF 3.37 MB
master's thesis
Ispitivanje otpornosti na abrazijsko trošenje TiN/TiCN prevlaka na visokolegiranim alatnim čelicima za hladni rad
Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2017. urn:nbn:hr:235:697534
Babić, Domagoj
University of Zagreb
Faculty of Mechanical Engineering and Naval Architecture

Institutional repository: Repository of Faculty of Mechanical Engineering and Naval Architecture University of Zagreb

Cite this document

Babić, D. (2017). Ispitivanje otpornosti na abrazijsko trošenje TiN/TiCN prevlaka na visokolegiranim alatnim čelicima za hladni rad (Master's thesis). Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:235:697534

Babić, Domagoj. "Ispitivanje otpornosti na abrazijsko trošenje TiN/TiCN prevlaka na visokolegiranim alatnim čelicima za hladni rad." Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2017. https://urn.nsk.hr/urn:nbn:hr:235:697534

Babić, Domagoj. "Ispitivanje otpornosti na abrazijsko trošenje TiN/TiCN prevlaka na visokolegiranim alatnim čelicima za hladni rad." Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2017. https://urn.nsk.hr/urn:nbn:hr:235:697534

Babić, D. (2017). 'Ispitivanje otpornosti na abrazijsko trošenje TiN/TiCN prevlaka na visokolegiranim alatnim čelicima za hladni rad', Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, accessed 14 November 2024, https://urn.nsk.hr/urn:nbn:hr:235:697534

Babić D. Ispitivanje otpornosti na abrazijsko trošenje TiN/TiCN prevlaka na visokolegiranim alatnim čelicima za hladni rad [Master's thesis]. Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture; 2017 [cited 2024 November 14] Available at: https://urn.nsk.hr/urn:nbn:hr:235:697534

D. Babić, "Ispitivanje otpornosti na abrazijsko trošenje TiN/TiCN prevlaka na visokolegiranim alatnim čelicima za hladni rad", Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Zagreb, 2017. Available at: https://urn.nsk.hr/urn:nbn:hr:235:697534

Metadata
TitleIspitivanje otpornosti na abrazijsko trošenje TiN/TiCN prevlaka na visokolegiranim alatnim čelicima za hladni rad
Title (english)Abrasion wear testing of TiN/TiCN coatings deposited on high alloyed cold work tool steels
AuthorDomagoj Babić
MentorDarko Landek (mentor)
GranterUniversity of Zagreb
Faculty of Mechanical Engineering and Naval Architecture
Zagreb
Defense date and country2017-12-07, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U radu je opisan PACVD postupak prevlačenja i mogućnost povećanja otpornosti na abrazijsko trošenje visokolegiranih alatnih čelika za hladni rad. Korištena je TiCN prevlaka koja se nanosila na osnovni materijal izrađen od čelika Böhler K110 (EN X155CrVMo12-1), odnosno Böhler K390PM dobiven metalurgijom praha. Opisan je postupak ispitivanja otpornosti na abrazijsko trošenje metodom “suhi pijesak/gumeni kotač“ kako bi se utvrdio utjecaj osnovnog materijala, pripreme površine i debljine prevlake na otpornost abrazijskom trošenju. Uz ispitivanja otpornosti na abrazijsko trošenje, ispitavala se i hrapavost površine uzoraka pertometrom, debljina nanesenih prevlaka kalotestom te adhezivnost prevlake na tvrdomjeru Rockwell C. Tragovi trošenja na ispitnim uzorcima su analizirani na stereomikroskopu dok je njihova mikrostruktura analizirana na svjetlosnom mikroskopu. Ispitivanja su pokazala dobru adhezivnost TiCN prevlake na oba osnovna materijala, kao i najveći utjecaj vrste osnovnog materijala i debljine prevlake na otpornost abrazijskom trošenju.
Abstract (english)
In this work PACVD (Plasma-Assisted Chemical Vapour Deposition) procedure is described, as well as the possibilities of improving resistance to abrasive wear of high-alloyed cold work steels. Böhler K110 (EN X155CrVMo12-1) and Böhler K390MC steels are applied as the base for TiCN coating. The procedure of examining abrasive wear resistance via “dry sand-rubber wheel“ method is described. The purpose of examining abrasive wear resistance is to determine connection between base material, surface preparation, coating thickness and abrasive wear resistance of high-alloyed cold work steels. Along with method “dry sand-rubber wheel“, surface rougness via perthometer, coating thickness via Calotest and coating adhesion via Rockwell C hardness tester are also examined. The surfaces of worn samples are analyzed using a stereo microscope while their microstructure is analyzed using an optical microscope. Tests showed good adhesion of TiCN coating on both base materials. Type of material applied as base for TiCN coating and coating thickness showed as most important contributors to the abrasive wear resistance.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:235:697534
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2019-05-24 12:50:25