prikaz prve stranice dokumenta Uređaj za čišćenje zavara na okvirima od PVC profila
  Download
PDF 13.22 MB
undergraduate thesis
Uređaj za čišćenje zavara na okvirima od PVC profila
Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2018. urn:nbn:hr:235:046321
Vegar, Matej
University of Zagreb
Faculty of Mechanical Engineering and Naval Architecture

Institutional repository: Repository of Faculty of Mechanical Engineering and Naval Architecture University of Zagreb

Cite this document

Vegar, M. (2018). Uređaj za čišćenje zavara na okvirima od PVC profila (Undergraduate thesis). Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:235:046321

Vegar, Matej. "Uređaj za čišćenje zavara na okvirima od PVC profila." Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2018. https://urn.nsk.hr/urn:nbn:hr:235:046321

Vegar, Matej. "Uređaj za čišćenje zavara na okvirima od PVC profila." Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2018. https://urn.nsk.hr/urn:nbn:hr:235:046321

Vegar, M. (2018). 'Uređaj za čišćenje zavara na okvirima od PVC profila', Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, accessed 18 May 2024, https://urn.nsk.hr/urn:nbn:hr:235:046321

Vegar M. Uređaj za čišćenje zavara na okvirima od PVC profila [Undergraduate thesis]. Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture; 2018 [cited 2024 May 18] Available at: https://urn.nsk.hr/urn:nbn:hr:235:046321

M. Vegar, "Uređaj za čišćenje zavara na okvirima od PVC profila", Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Zagreb, 2018. Available at: https://urn.nsk.hr/urn:nbn:hr:235:046321

Metadata
TitleUređaj za čišćenje zavara na okvirima od PVC profila
Title (english)Device for cleaning the weldings on the frames made of PVC profiles
AuthorMatej Vegar
MentorMario Štorga (mentor)
GranterUniversity of Zagreb
Faculty of Mechanical Engineering and Naval Architecture
Zagreb
Defense date and country2018-09-26, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U radu je osmišljen i konstrukcijski razrađen uređaj za čišćenje zavara na okvirima od PVC profila. Taj uređaj služi za uklanjanje srhova nastalih zavarivanjem PVC profila i obično se koristi kod izrade prozora, vrata i sličnih proizvoda od PVC-a. Budući da zavarivanje spoja dvaju PVC profila ostavlja srhove koji mogu biti oštri, a i neugodni su za vidjeti, u procesu proizvodnje se ti srhovi uklanjaju te tako nastaje spoj koji je uredan. Okvir od PVC profila se postavlja u stroj na način da je spoj pozicioniran na točno određeno mjesto. Uređajem upravlja čovjek tako što pritisne potrebne gumbe ili pedale. Okvir je potrebno učvrstiti kako bi bio nepomičan. Nakon toga se najprije trebaju odrezati horizontalni srhovi posebnim noževima ili drugim alatima, a nakon njih i vertikalni srh pomoću glodala ili nekim drugim alatom. Analizom postojećih komponenti na tržištu odabrani su standardni dijelovi, a cjeloviti 3D model je napravljen u programskom paketu SolidWorks. Rad sadrži analizu tržišta, razradu funkcijske dekompozicije, prikaz morfološke matrice, skice i objašnjenja koncepata (moguća rješenja), te 3D prikaz i tehničku dokumentaciju konstrukcijski razrađenog rješenja.
Abstract (english)
In this bachelor thesis, a design-constructed cleaning device for disruption of frames on PVC profiles has been designed. This device is used to remove cracks caused by the welding of PVC profiles and is usually used for window, door and similar PVC products. Since the welding of the joint between two PVC profiles leaves angles that can be sharp and unpleasant to see, in the process of production, these sags are removed so that a neat compound is formed. The PVC profile frame is placed in the machine in such a way that the joint is positioned in the exact position. The device is controlled by pressing the required buttons or pedals. The frame should be fixed in order to be motionless. After that, first you need to cut the horizontal skeins with special knives or other tools, followed by a vertical squeegee using a sander or some other tool. By analyzing existing components on the market, standard parts have been selected and a complete 3D model is made in the SolidWorks software package. The paper contains market analysis, elaborate functional decomposition, display of morphological matrix, sketches and conceptual explanations (possible solutions), and 3D visualization and technical documentation of a constructed solution.
Keywords
Languagecroatian
URN:NBNurn:nbn:hr:235:046321
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2019-05-24 12:53:45